Community
Civil 3D Forum
Welcome to Autodesk’s Civil 3D Forums. Share your knowledge, ask questions, and explore popular AutoCAD Civil 3D topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Issue with Structur heigths

2 REPLIES 2
SOLVED
Reply
Message 1 of 3
office
334 Views, 2 Replies

Issue with Structur heigths

Hi,

 

when i try to lower the height from an Standard-Catalog-Structure "DACH Metric Structures - DACH Abwasserkanalschächte - AeccStructEccentricCylinder_Metric_Dach" it block at an certain level (1,622m).

 

With a diameter of 1000 mm there are products available with an height rim to cone top of an 1,05 m. why I not able to create this? (doesn't work with similar objekts from the Catalog)

 

I tried to find limits which might be possibly set in the Component-Builder, but found non.

 

Win7 64bit
HP z400 Workstation
ATI FirePro V4800
C3D2013
2 REPLIES 2
Message 2 of 3
Christian_Bauer
in reply to: office

Please correct me, but this is due to the Parameter "Vertical Pipe Clearance" (SVPC), which controls the minimum Height of your Structure, which does not allow to have a Height less than this.

 

The "Vertical Pipe Clearance" is computed by: SVPC = SFH + SCH + SBPC

 

SFH Frame Height (List) 160 or 200 mm
SCH Cone Height (List) 600 mm
SBPC barrel Pipe Clearance (Constants) 600 mm

 

HTH



Christian Bauer
Message 3 of 3
office
in reply to: Christian_Bauer

I tried this already, but it seem to be needed to oversize the element in first place and then switch to gain height by DEM (DGM).

 

Thanks for the quick support.

Win7 64bit
HP z400 Workstation
ATI FirePro V4800
C3D2013

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Rail Community


Autodesk Design & Make Report