I have a surface, a centerline alignment, and an offset alignment for the centerline alignment. Also a surface profile for the centerline alignment.
1. When i copy the centerline alignment in another drawing, it gets copied with the surface as well as the surface profile.
2. When i export the alignments using landxml, and import that landxml into another drawing, the offset alignment takes the property of a centerline alignment and that way its link with the original centerline alignment is lost.
Kindly reply for the issue. thanks
1. Can you explain exactly how you are copying the alignment?
2. I don't believe there is a 'solution' to this. When you export to Land xml the alignment is just an alignment, no specific type. So when you import it back C3D will give it the default type "Centerline". Can you use a data shortcut instead of Landxml?
Credit where credit is due! Give kudos or accept as solution whenever you can.
It usually causes problems to use the clipboard to copy C3D objects from one drawing to another.
I also think that the LandXML method will drop the offset property of the alignment. Try using either a data reference or simply X-Referencing the alignment into the destination drawing to get the results you expect.
Access a broad range of knowledge to help get the most out of your products and services.
Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.
Upgrading to a 2015 product? Make sure to check these out 1st!