like a +1% slope from the outside lines towards the center line
Solved! Go to Solution.
Solved by neilyj666. Go to Solution.
maybe my method is wrong, so the outside line is a feature line, then i used the grading tool to make it 1% slope towards the center line, then i add to surface as breakline and it comes out like that. i want the inside to be uniformed with the grade, not like how it shows.
Like this?
I just used a feature line to do this but I can't quite work out how you are using the grading trools for this?
neilyj (No connection with Autodesk other than using the products in the real world)
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
neilyj (No connection with Autodesk other than using the products in the real world)
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
Joe Bouza
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
Joe Bouza
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.