is there a way to add a crown to a field with the grading tool?

[mk9023]

like a +1% slope from the outside lines towards the center line

[mk9023]

maybe my method is wrong, so the outside line is a feature line, then i used the grading tool to make it 1% slope towards the center line, then i add to surface as breakline and it comes out like that. i want the inside to be uniformed with the grade, not like how it shows.

[neilyj666]

Like this?

I just used a feature line to do this but I can't quite work out how you are using the grading trools for this?

[mk9023]

exactly like that. you only used feature line? can you list your steps please.

[neilyj666 · Accepted solution]

Home > Feature Line > Create Feature Line and add levels as you go (or add them later)
Home > Surfaces >Create Surface and add featureline to surface OR right click featureline and Add to Surface as Breakline.

Take a look at the help/featureline editing options to see what can be done with them as they are much more stable than gradings.

[Joe-Bouza]

Grading infill done