AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Reply
*Expert Elite*
Joe-Bouza
Posts: 5,125
Registered: ‎12-15-2008
Message 1 of 30 (436 Views)
Accepted Solution

Intersections

436 Views, 29 Replies
05-18-2012 07:47 AM

I'm confused with this message, I thought the wizard was supposed to make them even?

 

 

 

 

int error.PNG

 

Thank you

Joseph D. Bouza, P.E. (one of 'THOSE' People) Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram


Note: Its all Resistentialism, so keep calm and carry on

64 Bit Win7 OS

I have no curves?

 

I opened an SR. I'm sure my order of operations is flawed.

I got my SR response: evidently the intersection tool gets confused if the design alignments have more than 1 layout profile in them. I got rid of extraneous layput profiles and everything went according to hoyle

Valued Mentor
owenmull
Posts: 356
Registered: ‎09-06-2011
Message 2 of 30 (422 Views)

Re: Intersections

05-18-2012 08:15 AM in reply to: Joe-Bouza

Try inserting PI's at the appropriate locations on each profile.

 

How did you create the profile?

 

In my experience, I've found that the best way to get the intersection tools to work is to develop the profile from PIs, not from free-hand tangents.

-Owen
Windows 7 x 64 bit
NVidia Quadro K3000M Dual Monitor
32.0 GB RAM
Intel Core i7-3820QM @ 2.70 GHz
Civil 3D 2013 SP 2
______________________________________________________________
Usually, I find that the problem is between the keyboard and the chair.
*Expert Elite*
jmayo
Posts: 3,002
Registered: ‎11-13-2006
Message 3 of 30 (418 Views)

Re: Intersections

05-18-2012 08:21 AM in reply to: Joe-Bouza

Just out of curiosity, does the intersection occur on a VC of the secondary rd profile?

John Mayo, PE
IDSP 2014
Win 7 64, Xeon ES165@3.2Ghz,
64 GB RAM, Quadro K4000 (x2)
*Expert Elite*
jmayo
Posts: 3,002
Registered: ‎11-13-2006
Message 4 of 30 (416 Views)

Re: Intersections

05-18-2012 08:24 AM in reply to: Joe-Bouza

Also, did you try to continue with the command? I think if you do it will match the cl but the rest of the seconadry profile will need attention and do so is nothing an UNDO can't fix.

John Mayo, PE
IDSP 2014
Win 7 64, Xeon ES165@3.2Ghz,
64 GB RAM, Quadro K4000 (x2)
*Expert Elite*
Joe-Bouza
Posts: 5,125
Registered: ‎12-15-2008
Message 5 of 30 (399 Views)

Re: Intersections

05-18-2012 10:22 AM in reply to: owenmull

If I knew the appropriate place I would need the intersection wizard?

Thank you

Joseph D. Bouza, P.E. (one of 'THOSE' People) Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram


Note: Its all Resistentialism, so keep calm and carry on

64 Bit Win7 OS
*Expert Elite*
Joe-Bouza
Posts: 5,125
Registered: ‎12-15-2008
Message 6 of 30 (398 Views)

Re: Intersections

05-18-2012 10:24 AM in reply to: owenmull

I drew a layout profile from the intersection to the end of the side road

Thank you

Joseph D. Bouza, P.E. (one of 'THOSE' People) Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram


Note: Its all Resistentialism, so keep calm and carry on

64 Bit Win7 OS
*Expert Elite*
Joe-Bouza
Posts: 5,125
Registered: ‎12-15-2008
Message 7 of 30 (397 Views)

Re: Intersections

05-18-2012 10:24 AM in reply to: jmayo

Yes and no adjust ment is made to the secondary profile

Thank you

Joseph D. Bouza, P.E. (one of 'THOSE' People) Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram


Note: Its all Resistentialism, so keep calm and carry on

64 Bit Win7 OS
*Expert Elite*
Joe-Bouza
Posts: 5,125
Registered: ‎12-15-2008
Message 8 of 30 (391 Views)

Re: Intersections

05-18-2012 10:29 AM in reply to: jmayo

Now I added a PVI to the secondary at the eop of the primary road and still get the message

Thank you

Joseph D. Bouza, P.E. (one of 'THOSE' People) Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram


Note: Its all Resistentialism, so keep calm and carry on

64 Bit Win7 OS
*Expert Elite*
mathewk
Posts: 2,768
Registered: ‎07-09-2003
Message 9 of 30 (389 Views)

Re: Intersections

05-18-2012 10:31 AM in reply to: Joe-Bouza
I can't remember exactly, but a message similar to this happens when you're trying to make an intersection with DREF'd profiles...you can't do that.
Matt Kolberg
Cansel - Autodesk Division
http://www.cansel.ca/
*Expert Elite*
Joe-Bouza
Posts: 5,125
Registered: ‎12-15-2008
Message 10 of 30 (388 Views)

Re: Intersections

05-18-2012 10:34 AM in reply to: mathewk
No Dref. Joseph D. Bouza, P.E. Direct: 516.224.5237 Senior Engineer CAMERON ENGINEERING & ASSOCIATES, LLP 100 Sunnyside Boulevard, Suite 100 * Woodbury, NY 11797 Phone: 516.827.4900 Ext. __ * Fax: 516.827.4920 260 Madison Avenue, 8th Floor * New York, NY 10016 Phone: 212.324.4000 * Fax: 646.216.2001 303 Old Tarrytown Road, 1st Floor * White Plains, NY 10603 Phone: 914.721.8300 * Fax: 914-997-0957 * Mechanical & Electrical Engineering * Security & CCTV Engineering * Civil Engineering * Site Development & Landscape Architecture * Planning, GIS & Environmental Engineering * Water & Wastewater Engineering * Traffic & Transportation Engineering * Structural Engineering * Construction Management CONFIDENTIALITY NOTICE: This email may contain confidential and privileged material for the sole use of the intended recipient(s). Any review, use, distribution or disclosure by others is strictly prohibited. If you have received this communication in error, please notify the sender immediately and delete the email message. Thank you.
Thank you

Joseph D. Bouza, P.E. (one of 'THOSE' People) Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram


Note: Its all Resistentialism, so keep calm and carry on

64 Bit Win7 OS
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Are You Going To Be @ AU 2014? Feel free to drop by our AU topic post and share your plans, plug a class that you're teaching, or simply check out who else from the community might be in attendance. Ohh and don't forgot to stop by the Autodesk Help | Learn | Collaborate booths in the Exhibit Hall and meet our community team if you get a chance!