AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Posts: 17
Registered: ‎07-06-2009
Message 1 of 3 (294 Views)

Intersection with Medians

294 Views, 2 Replies
01-14-2013 10:32 AM

Hi All,


I am "trying" to design a intersection that contains four lane divided road. Northbound and Southbound lanes are 2% normal crown with a curbed median. I have alignments for each crown. The intersecting road is not crowned. This road is a retrofit so I am limited quite a bit so the intersection wizard is out. We're going old school with this one.


I'm looking for any tips, advice on methods of designing, especially the medians nose.


I've attached a picture to help explain. I can upload the drawing if someone wants to point out my errors/mistakes.


I am using AutoCAD Civil 3D 2013. Thanks in advance.

*Expert Elite*
Posts: 2,204
Registered: ‎11-08-2005
Message 2 of 3 (276 Views)

Re: Intersection with Medians

01-14-2013 11:28 AM in reply to: Conrad_A

If you have access to the Autodesk University 2012 class materials then search for my session.  It details a workflow which may be useful for your situation.


CI2160 - Intersections from the Inside Out. 


Posts: 17
Registered: ‎07-06-2009
Message 3 of 3 (259 Views)

Re: Intersection with Medians

01-14-2013 12:29 PM in reply to: sboon

Thanks Steve,


It looks like this is in the right direction. The complex intersection you describe matches my design pretty close so the workflow should be similar. I found your class but was only able to get access to the powerpoint and dwgs. The handout wasn't accessible. Is there any other information in the handout that would be useful?


Thanks again for your time.



Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Are You Going To Be @ AU 2014? Feel free to drop by our AU topic post and share your plans, plug a class that you're teaching, or simply check out who else from the community might be in attendance. Ohh and don't forgot to stop by the Autodesk Help | Learn | Collaborate booths in the Exhibit Hall and meet our community team if you get a chance!