AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Posts: 17
Registered: ‎07-06-2009
Message 1 of 3 (295 Views)

Intersection with Medians

295 Views, 2 Replies
01-14-2013 10:32 AM

Hi All,


I am "trying" to design a intersection that contains four lane divided road. Northbound and Southbound lanes are 2% normal crown with a curbed median. I have alignments for each crown. The intersecting road is not crowned. This road is a retrofit so I am limited quite a bit so the intersection wizard is out. We're going old school with this one.


I'm looking for any tips, advice on methods of designing, especially the medians nose.


I've attached a picture to help explain. I can upload the drawing if someone wants to point out my errors/mistakes.


I am using AutoCAD Civil 3D 2013. Thanks in advance.

*Expert Elite*
Posts: 2,225
Registered: ‎11-08-2005
Message 2 of 3 (277 Views)

Re: Intersection with Medians

01-14-2013 11:28 AM in reply to: Conrad_A

If you have access to the Autodesk University 2012 class materials then search for my session.  It details a workflow which may be useful for your situation.


CI2160 - Intersections from the Inside Out. 


Posts: 17
Registered: ‎07-06-2009
Message 3 of 3 (260 Views)

Re: Intersection with Medians

01-14-2013 12:29 PM in reply to: sboon

Thanks Steve,


It looks like this is in the right direction. The complex intersection you describe matches my design pretty close so the workflow should be similar. I found your class but was only able to get access to the powerpoint and dwgs. The handout wasn't accessible. Is there any other information in the handout that would be useful?


Thanks again for your time.



Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.