Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
Intersection Design Tool not generating correct curb return profiles.
Intersection Design Tool not generating correct curb return profiles.
In Civil3D 2014 when I use the intersection design tool, the curb return profiles are being generated inconsistently or sometimes not at all. For example on th RT side of an intersection the NE and SE curb return regions generate, but not accurately. On the west side the curb return profiles are at elevation zero and therefore the curb return corridor regions are generated at elevation zero. See attached png.
![Autodesk Design & Make Report](https://forums.autodesk.com/t5/image/serverpage/image-id/1350519iCB55845EBFC43016/image-size/large?v=v2&px=999" "Autodesk Design & Make Report")