Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
Hello!
We have noticed that at least in several drawings made in Civil3D 2009 incorrect curve type is shown in profile view bands. For example, profile contains sag curve, but in vertical geometry band it is shown as a crest curve. I have Service Update 1 installed.
You can see example in the file attached. The first and lots more curves are affected.
We have seen this issue when the vertical tangents between grades are set to zero grade. I haven't seen this issue since. Thanks for the heads up. Looks like you found a regression here.
![Autodesk Design & Make Report](https://forums.autodesk.com/t5/image/serverpage/image-id/1350519iCB55845EBFC43016/image-size/large?v=v2&px=999" "Autodesk Design & Make Report")