Community
Civil 3D Forum
Welcome to Autodesk’s Civil 3D Forums. Share your knowledge, ask questions, and explore popular AutoCAD Civil 3D topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

if i open civil3d i cant deselect an object if it is on an image

6 REPLIES 6
Reply
Message 1 of 7
syria89
740 Views, 6 Replies

if i open civil3d i cant deselect an object if it is on an image

for example

you open civil3d (not autocad as civil) and u link an image and draw some lines inside the image zone.

select all the lines then try to deselect a line by usuing  shift. it doesnt work. but if you open autocad you will have no probleme

when i said open autocad i mean you have to close completley civil then open autocad as civil. i tried just to chang civil profil to autocad but doesnt work. so this i say to close it completley

 

is this a normal problem or autodesk have to find a solution for it

thanks in advance

 

6 REPLIES 6
Message 2 of 7
Alfred.NESWADBA
in reply to: syria89

Hi,

 

this is a setting that comes with the Map3D-part into Civil3D.

Start command _MAPIOPTIONS, go to second tab and you will find a checkbox for the usage of <SHIFT> combined with image and selection.

Change this option and it should work like you expect it.

 

HTH, - alfred -

------------------------------------------------------------------------------------
Alfred NESWADBA
Ingenieur Studio HOLLAUS ... www.hollaus.at ... blog.hollaus.at ... CDay 2024
------------------------------------------------------------------------------------
(not an Autodesk consultant)
Message 3 of 7
syria89
in reply to: Alfred.NESWADBA

thanks alot

do you have any idea why there is an option like this in map and even ratser design have it too

 

Message 4 of 7
Alfred.NESWADBA
in reply to: syria89

Hi,

 

>> do you have any idea why there is an option like this [...]

Sorry, no idea, it was Autodesk, not me 😉

 

- alfred -

------------------------------------------------------------------------------------
Alfred NESWADBA
Ingenieur Studio HOLLAUS ... www.hollaus.at ... blog.hollaus.at ... CDay 2024
------------------------------------------------------------------------------------
(not an Autodesk consultant)
Message 5 of 7
AllenJessup
in reply to: syria89

Probably because someone added it to a whish list at one point. There is also a similar setting in the RD Object enabler that will do the same thing.

 

Allen



Allen Jessup
Engineering Specialist / CAD Manager

Message 6 of 7
Murph_Map
in reply to: syria89

A left over from the old DOS Softdesk days that's never got updated would be my guess.

Murph
Supporting the troops daily.
Message 7 of 7
AllenJessup
in reply to: Murph_Map

Good thought Murph. I'll see if I can check that out. If I can remember past the weekend that is!

 

Allen



Allen Jessup
Engineering Specialist / CAD Manager

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Rail Community


Autodesk Design & Make Report