AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Reply
*Expert Elite*
Joe-Bouza
Posts: 5,179
Registered: ‎12-15-2008
Message 1 of 24 (445 Views)
Accepted Solution

IDSP 2014 search paths

445 Views, 23 Replies
09-19-2013 08:47 AM

I'm creating IDSP deployments and I am struct by the fact that the civil3d component does not offer configurable search paths, or am I missing something?

Thank you

Joseph D. Bouza, P.E. (one of 'THOSE' People) Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram


Note: Its all Resistentialism, so keep calm and carry on

64 Bit Win7 OS
They are not, and The MEP deployment lets you but is known not to work.
Answ: Use Arg or a lisp to configure or go machine to machine
*Expert Elite*
mathewk
Posts: 2,790
Registered: ‎07-09-2003
Message 2 of 24 (432 Views)

Re: IDSP 2014 search paths

09-19-2013 10:07 AM in reply to: Joe-Bouza

Which search paths specifically?  i always bundle an ARG and a custom desktop icon ith all of my deployments.  This takes care of all the AutoCAD paths.  Sometimes I'll bundle  REG file for paths and settings that cannot be set in an ARG.

 

AutoCAD deployment creator has a page where you can specify paths.  C3D doesn't.  i've used this feature when deploying AutoCAD, but it is very finicky and i've stopped using it.  too many problems.  the ARG works great for most of my customizations.

Matt Kolberg
Cansel - Autodesk Division
http://www.cansel.ca/
*Expert Elite*
Joe-Bouza
Posts: 5,179
Registered: ‎12-15-2008
Message 3 of 24 (422 Views)

Re: IDSP 2014 search paths

09-19-2013 10:28 AM in reply to: mathewk
Hi Matt
I too have used arg in the past but was unaware I could tack it on to the deployment. I guess you deploy as default the launch c3d to create the arg, then modify the deployment, correct? load in the extra program section?

Plotter paths, plot syle,tool palettes, lisp folder, special fonts to name a few
Thank you

Joseph D. Bouza, P.E. (one of 'THOSE' People) Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram


Note: Its all Resistentialism, so keep calm and carry on

64 Bit Win7 OS
*Expert Elite*
rkmcswain
Posts: 3,629
Registered: ‎11-13-2006
Message 4 of 24 (416 Views)

Re: IDSP 2014 search paths

09-19-2013 10:44 AM in reply to: Joe-Bouza

FWIW, I leave the deployments alone and run them straight OOTB, and then post-process the install with startup files (acad.lsp kicks everything off). Been doing it this way since ACAD2005 with zero issues.

*Expert Elite*
Joe-Bouza
Posts: 5,179
Registered: ‎12-15-2008
Message 5 of 24 (410 Views)

Re: IDSP 2014 search paths

09-19-2013 10:46 AM in reply to: rkmcswain
Sounds good. could you post a sample?
Thank you

Joseph D. Bouza, P.E. (one of 'THOSE' People) Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram


Note: Its all Resistentialism, so keep calm and carry on

64 Bit Win7 OS
*Expert Elite*
rkmcswain
Posts: 3,629
Registered: ‎11-13-2006
Message 6 of 24 (406 Views)

Re: IDSP 2014 search paths

09-19-2013 10:56 AM in reply to: Joe-Bouza

Joe-Bouza wrote:
Sounds good. could you post a sample?

Hopefully this will help.

http://bit.ly/19yOzDe

*Expert Elite*
Joe-Bouza
Posts: 5,179
Registered: ‎12-15-2008
Message 7 of 24 (399 Views)

Re: IDSP 2014 search paths

09-19-2013 11:02 AM in reply to: rkmcswain
I'll give it a look see. thanks
Thank you

Joseph D. Bouza, P.E. (one of 'THOSE' People) Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram


Note: Its all Resistentialism, so keep calm and carry on

64 Bit Win7 OS
*Expert Elite*
dgorsman
Posts: 5,691
Registered: ‎10-12-2006
Message 8 of 24 (396 Views)

Re: IDSP 2014 search paths

09-19-2013 11:04 AM in reply to: Joe-Bouza

I do something similar.  The installation is very basic and the default desktop shortcuts are removed.  The "Default user" desktop gets a shortcut to a BAT file which runs the standard set of programs to get the secondary installer going, then hits up the registry with the various settings we want, and adds the appropriate desktop shortcuts.  After that the paths are automatically controlled in a similar fashion as below.  By keeping the shortcuts off the desktop in lieu of a "Set up" icon the user isn't tempted to try running the software right away - its fairly obvious something needs to be done first.  And by separating out the settings into several REG files (as opposed to an ARG file) we can fix certain problems quickly without blowing away the whole profile.

----------------------------------
If you are going to fly by the seat of your pants, expect friction burns.
Adopt. Adapt. Overcome. Or be overcome.
A good question will be halfway to a good answer.


*Expert Elite*
Joe-Bouza
Posts: 5,179
Registered: ‎12-15-2008
Message 9 of 24 (388 Views)

Re: IDSP 2014 search paths

09-19-2013 11:13 AM in reply to: dgorsman
I'm sure once I get to digest all the great help I'll understand it but its a bit over my head an overwhelming. But greatly appreciated
Thank you

Joseph D. Bouza, P.E. (one of 'THOSE' People) Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram


Note: Its all Resistentialism, so keep calm and carry on

64 Bit Win7 OS
*Expert Elite*
rkmcswain
Posts: 3,629
Registered: ‎11-13-2006
Message 10 of 24 (386 Views)

Re: IDSP 2014 search paths

09-19-2013 11:19 AM in reply to: Joe-Bouza

Joe-Bouza wrote:
I'm sure once I get to digest all the great help I'll understand it but its a bit over my head an overwhelming. But greatly appreciated

I'm certainly not trying to be a know-it-all or say my way is the best, by any means... 

That aside if you want any more info or help, just let me know.

it may work for some people and not for others..

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.