AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Reply
Valued Contributor
52 Posts
2 Kudos
Registered: ‎01-24-2013
Post 1 of 2
Accepted Solution

How to open vehicle tracking add on?

728 Views, 1 Replies
04-17-2014 05:25 AM

I downloaded the 2015 trial version of Autodesk Vehicle Tracking. After a successful install, I expected to see it on my ribbon in Civil 3D 2014. However, it isn't there and there is no evidence of the install inside Civil 3D. How do I load the program? I have a stand alone license of Civil 3D 2014 and read in the forums that the trial version of Vehicle Tracking is also stand alone. Any help would be appreciated.

I think that the licensing combination (Civil 3D standalone and AVT trial is supported) but the issue is that you have 2014 version of AutoCAD and trial version of AVT 2015. According to readme you need to have 2014 version of AutoCAD or 2014 version of trial AVT.

 

If you happen to have Civil 3D 2015 and cannot see your ribbon with AVT tools try this:

 

  1. Enter CUILOAD in the command line and browse to the following location:
  2. C:\Users\<users>\AppData\Roaming\Autodesk\Vehicle Tracking\Menus
  3. Select atrc200.cuix and click Open
  4. Click Load and Close

Most likely you would have to look for Autodesk Vehicle Tracking 2014 trial version.  See this: http://www.autodesk.com/products/vehicle-tracking/free-trial

 

I hope this helps.

Product Support
785 Posts
45 Kudos
Registered: ‎08-11-2010
Post 2 of 2

Re: How to open vehicle tracking add on?

04-18-2014 07:35 AM in reply to: dslocum

I think that the licensing combination (Civil 3D standalone and AVT trial is supported) but the issue is that you have 2014 version of AutoCAD and trial version of AVT 2015. According to readme you need to have 2014 version of AutoCAD or 2014 version of trial AVT.

 

If you happen to have Civil 3D 2015 and cannot see your ribbon with AVT tools try this:

 

  1. Enter CUILOAD in the command line and browse to the following location:
  2. C:\Users\<users>\AppData\Roaming\Autodesk\Vehicle Tracking\Menus
  3. Select atrc200.cuix and click Open
  4. Click Load and Close

Most likely you would have to look for Autodesk Vehicle Tracking 2014 trial version.  See this: http://www.autodesk.com/products/vehicle-tracking/free-trial

 

I hope this helps.



Almas Suljevic
Product Support Specialist
Autodesk Global Subscription and Support
Autodesk, Inc.

Please click on "Accept as Solution" if post helped you resolve the issue.
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Are you interested in helping shape the future of the Autodesk Community? To participate in this brief usability study, please click here. Your time and input is greatly appreciated!