AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Reply
Contributor
stgospel
Posts: 13
Registered: ‎02-09-2009
Message 1 of 4 (1,352 Views)
Accepted Solution

How to make the Corridor Datum Surface to attach itself to all Datum Links

1352 Views, 3 Replies
05-12-2011 11:39 PM

KIndly Help Me

 

I have this corridor that has a typical "U-ditch" subassembly attached to its Assembly.

I have already created a corridor surface and used a Datum links as its data.

The problem is that when i generated the x-section, the corridor datum surface section (violet/magenta) are not all attached to the datum links.

I already reviewed the assembly and confirmed that the "U-ditch" has datum links in it.

you can view the attached pic.

In the Surface tab of Corridor properties, have you changed the Overhang Correction to 'bottom links'?

I've seen examples on this DG of that correcting this problem before.

Distinguished Contributor
NathanBee
Posts: 209
Registered: ‎12-07-2006
Message 2 of 4 (1,346 Views)

Re: How to make the Corridor Datum Surface to attach itself to all Datum Links

05-13-2011 01:59 AM in reply to: stgospel

In the Surface tab of Corridor properties, have you changed the Overhang Correction to 'bottom links'?

I've seen examples on this DG of that correcting this problem before.

Contributor
stgospel
Posts: 13
Registered: ‎02-09-2009
Message 3 of 4 (1,342 Views)

Re: How to make the Corridor Datum Surface to attach itself to all Datum Links

05-13-2011 02:13 AM in reply to: NathanBee

Thank you very much !! Ive been Using Civil 3d for 3 yrs now and i can't believe i forgot that.

Distinguished Contributor
NathanBee
Posts: 209
Registered: ‎12-07-2006
Message 4 of 4 (1,333 Views)

Re: How to make the Corridor Datum Surface to attach itself to all Datum Links

05-13-2011 03:06 AM in reply to: stgospel

No worries mate. Glad to have helped. :smileyhappy:

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.