KIndly Help Me
I have this corridor that has a typical "U-ditch" subassembly attached to its Assembly.
I have already created a corridor surface and used a Datum links as its data.
The problem is that when i generated the x-section, the corridor datum surface section (violet/magenta) are not all attached to the datum links.
I already reviewed the assembly and confirmed that the "U-ditch" has datum links in it.
you can view the attached pic.
Solved! Go to Solution.
In the Surface tab of Corridor properties, have you changed the Overhang Correction to 'bottom links'?
I've seen examples on this DG of that correcting this problem before.