Hello,
How to know what service pack is installed for AutoCAD civil 3D 2013.In in the window "about AutoCAD" i have product version:G.55.0.1
Thank you.
Solved! Go to Solution.
Solved by AllenJessup. Go to Solution.
Normally the version number is followed by ,SP1 or ,SP2 etc. indicating Service Pack installed in About dialog.
Looks like you don't currently have any SP's installed.
Below are the SP0 through SP2 versions for 2013:
SP0 VERNUM=G.55.0.1 4.4.2012
SP1 VERNUM=G.114.0.0 30.11.2012
SP2 VERNUM=G.204.0.0
This is what I get from "About".
Do you see something similar? Is you licensce Stand Alone, Network, Student, NFR?
Allen
Allen Jessup
CAD Manager - Designer
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
I found this page http://www.cadforum.cz/cadforum_en/products.asp
If you look about half way down. You'll see that version G.55.0.1 is Civil 3D 2013 with no service pack. Click on the more link after SP2 and it will take you to the autodesk page for that SP.
It never hurts to install an SP if you're not sure. If it's already installed you'll get a message telling you so and the installation will end.
Allen
Allen Jessup
CAD Manager - Designer
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
Thank you for your advice,
In my Civil 3D the "about" window does not give me the SP installed, so I can say that I am SP0!
Can't find what you're looking for? Ask the community or share your knowledge.