AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Valued Contributor
70 Posts
4 Kudos
Registered: ‎03-23-2007
Post 1 of 3

How to fix the profile to the end of the alignment?

201 Views, 2 Replies
10-17-2012 05:44 AM


I need to modify the alignment of a road because of a intersection.

My problem is the profile, because I have to modify the alignment from start point (0+000) and the profile to the end point to remaine in the same place.

Now Civil 3d is keeping the profile fixed in start point of the alignment and I want to be in the end point. Can I do this?


1,474 Posts
49 Kudos
Registered: ‎12-14-2006
Post 2 of 3

Re: How to fix the profile to the end of the alignment?

10-22-2012 07:34 AM in reply to: bpoleuca

reverse the alignment direction.   add to it.   then reverse the alignment direction again.



Civil 3D 2013
Win 7 Pro x64
Intel Xeon 2.0GHz
12Gb Ram
ATI Firepro 4800
Dell T5500
*Expert Elite*
5,265 Posts
327 Kudos
Registered: ‎12-15-2008
Post 3 of 3

Re: How to fix the profile to the end of the alignment?

10-22-2012 04:49 PM in reply to: bpoleuca

Good reason not to us 0+00 to start. A station equation would be a good way to go but you would have to be happy with some station back value.


Insert  a point on the alignment at the pgl elevation. Pull station 0+00 to the new location and add whatever other edits are required. When you are done project  the point to the profile view and autocad move your layout profile to the projected point.

Thank you

Joseph D. Bouza, P.E. (one of 'THOSE' People) Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram

Note: Its all Resistentialism, so keep calm and carry on

64 Bit Win7 OS
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Are you interested in helping shape the future of the Autodesk Community? To participate in this brief usability study, please click here. Your time and input is greatly appreciated!