AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Reply
Valued Contributor
bpoleuca
Posts: 61
Registered: ‎03-23-2007
Message 1 of 3 (190 Views)

How to fix the profile to the end of the alignment?

190 Views, 2 Replies
10-17-2012 05:44 AM

Hello,

I need to modify the alignment of a road because of a intersection.

My problem is the profile, because I have to modify the alignment from start point (0+000) and the profile to the end point to remaine in the same place.

Now Civil 3d is keeping the profile fixed in start point of the alignment and I want to be in the end point. Can I do this?

 

*Pro
dgordon
Posts: 1,474
Registered: ‎12-14-2006
Message 2 of 3 (154 Views)

Re: How to fix the profile to the end of the alignment?

10-22-2012 07:34 AM in reply to: bpoleuca

reverse the alignment direction.   add to it.   then reverse the alignment direction again.

 

Dan

Civil 3D 2013
Win 7 Pro x64
Intel Xeon 2.0GHz
12Gb Ram
ATI Firepro 4800
Dell T5500
www.preinnewhof.com
*Expert Elite*
Joe-Bouza
Posts: 4,992
Registered: ‎12-15-2008
Message 3 of 3 (133 Views)

Re: How to fix the profile to the end of the alignment?

10-22-2012 04:49 PM in reply to: bpoleuca

Good reason not to us 0+00 to start. A station equation would be a good way to go but you would have to be happy with some station back value.

 

Insert  a point on the alignment at the pgl elevation. Pull station 0+00 to the new location and add whatever other edits are required. When you are done project  the point to the profile view and autocad move your layout profile to the projected point.

Thank you

Joseph D. Bouza, P.E. (one of 'THOSE' People) Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram


Note: Its all Resistentialism, so keep calm and carry on

64 Bit Win7 OS
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.