AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Reply
Contributor
manrajankalimuthu
Posts: 25
Registered: ‎07-17-2013
Message 1 of 10 (321 Views)
Accepted Solution

how to create expressionin structure reference alignment profile elevation

321 Views, 9 Replies
08-03-2013 05:45 AM

i am create the stron network.I want structure profile elevation.

how to create expressionin  structure reference alignment profile elevation

When you add a label for the structure, as long as the label style has the refence text for a profile included, you will be prompted to select the profile to reference. You can always go back and change or set it in the Properties Palette. 

8-3-2013 2-26-09 PM.png

*Expert Elite*
tcorey
Posts: 2,768
Registered: ‎12-18-2002
Message 2 of 10 (294 Views)

Re: how to create expressionin structure reference alignment profile elevation

08-03-2013 09:48 AM in reply to: manrajankalimuthu

Hello,

 

You don't need an Expression, you just need a Reference Text component in the Structure Label Style.

 

 

 

Reference Text.png

 

And then pick select Profile.

 

Profile Reference.png

 

When you place the label, it will prompt you to select the profile for this reference.

 

Tim

 

Tim Corey, Owner
Delta Engineering Systems
Redding, CA
Autodesk Authorized Value-Added Reseller
Contributor
manrajankalimuthu
Posts: 25
Registered: ‎07-17-2013
Message 3 of 10 (288 Views)

Re: how to create expressionin structure reference alignment profile elevation

08-03-2013 10:46 AM in reply to: tcorey

i followed ur instruction. i try to shown profile elevation. But i could not get value. 

*Expert Elite*
BrianHailey
Posts: 2,868
Registered: ‎04-27-2005
Message 4 of 10 (276 Views)

Re: how to create expressionin structure reference alignment profile elevation

08-03-2013 10:59 AM in reply to: manrajankalimuthu

Select the label, go into your AutoCAD properties, and select a reference profile.

Brian Hailey
CAD-1.com
My Blog
*Expert Elite*
Joe-Bouza
Posts: 5,189
Registered: ‎12-15-2008
Message 5 of 10 (271 Views)

Re: how to create expressionin structure reference alignment profile elevation

08-03-2013 11:07 AM in reply to: manrajankalimuthu
I think the structure would also have to refer to the alignment of said profile
Thank you

Joseph D. Bouza, P.E. (one of 'THOSE' People) Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram


Note: Its all Resistentialism, so keep calm and carry on

64 Bit Win7 OS
Contributor
manrajankalimuthu
Posts: 25
Registered: ‎07-17-2013
Message 6 of 10 (268 Views)

Re: how to create expressionin structure reference alignment profile elevation

08-03-2013 11:17 AM in reply to: Joe-Bouza

i am already set strucuture refence alignment. But, how to get relavant station profile elevation..

 

Contributor
manrajankalimuthu
Posts: 25
Registered: ‎07-17-2013
Message 7 of 10 (263 Views)

Re: how to create expressionin structure reference alignment profile elevation

08-03-2013 11:19 AM in reply to: BrianHailey
autocad property?? what is that? Are you mean structure reference alignment.
*Expert Elite*
Jeff_M
Posts: 4,521
Registered: ‎07-22-2003
Message 8 of 10 (247 Views)

Re: how to create expressionin structure reference alignment profile elevation

08-03-2013 02:29 PM in reply to: manrajankalimuthu

When you add a label for the structure, as long as the label style has the refence text for a profile included, you will be prompted to select the profile to reference. You can always go back and change or set it in the Properties Palette. 

8-3-2013 2-26-09 PM.png

Jeff_M, also a frequent Swamper
Contributor
manrajankalimuthu
Posts: 25
Registered: ‎07-17-2013
Message 9 of 10 (224 Views)

Re: how to create expressionin structure reference alignment profile elevation

08-03-2013 10:25 PM in reply to: manrajankalimuthu
It is ok.how to add reference profile elevation into structure table column.
Contributor
manrajankalimuthu
Posts: 25
Registered: ‎07-17-2013
Message 10 of 10 (209 Views)

Re: how to create expressionin structure reference alignment profile elevation

08-04-2013 01:57 PM in reply to: manrajankalimuthu
Thank you
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.