AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Reply
Contributor
manrajankalimuthu
Posts: 25
Registered: ‎07-17-2013
Message 1 of 10 (316 Views)
Accepted Solution

how to create expressionin structure reference alignment profile elevation

316 Views, 9 Replies
08-03-2013 05:45 AM

i am create the stron network.I want structure profile elevation.

how to create expressionin  structure reference alignment profile elevation

When you add a label for the structure, as long as the label style has the refence text for a profile included, you will be prompted to select the profile to reference. You can always go back and change or set it in the Properties Palette. 

8-3-2013 2-26-09 PM.png

*Expert Elite*
tcorey
Posts: 2,714
Registered: ‎12-18-2002
Message 2 of 10 (289 Views)

Re: how to create expressionin structure reference alignment profile elevation

08-03-2013 09:48 AM in reply to: manrajankalimuthu

Hello,

 

You don't need an Expression, you just need a Reference Text component in the Structure Label Style.

 

 

 

Reference Text.png

 

And then pick select Profile.

 

Profile Reference.png

 

When you place the label, it will prompt you to select the profile for this reference.

 

Tim

 

Tim Corey, Owner
Delta Engineering Systems
Redding, CA
Autodesk Authorized Value-Added Reseller
Contributor
manrajankalimuthu
Posts: 25
Registered: ‎07-17-2013
Message 3 of 10 (283 Views)

Re: how to create expressionin structure reference alignment profile elevation

08-03-2013 10:46 AM in reply to: tcorey

i followed ur instruction. i try to shown profile elevation. But i could not get value. 

*Expert Elite*
BrianHailey
Posts: 2,850
Registered: ‎04-27-2005
Message 4 of 10 (271 Views)

Re: how to create expressionin structure reference alignment profile elevation

08-03-2013 10:59 AM in reply to: manrajankalimuthu

Select the label, go into your AutoCAD properties, and select a reference profile.

Brian Hailey
CAD-1.com
My Blog
*Expert Elite*
Joe-Bouza
Posts: 5,124
Registered: ‎12-15-2008
Message 5 of 10 (266 Views)

Re: how to create expressionin structure reference alignment profile elevation

08-03-2013 11:07 AM in reply to: manrajankalimuthu
I think the structure would also have to refer to the alignment of said profile
Thank you

Joseph D. Bouza, P.E. (one of 'THOSE' People) Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram


Note: Its all Resistentialism, so keep calm and carry on

64 Bit Win7 OS
Contributor
manrajankalimuthu
Posts: 25
Registered: ‎07-17-2013
Message 6 of 10 (263 Views)

Re: how to create expressionin structure reference alignment profile elevation

08-03-2013 11:17 AM in reply to: Joe-Bouza

i am already set strucuture refence alignment. But, how to get relavant station profile elevation..

 

Contributor
manrajankalimuthu
Posts: 25
Registered: ‎07-17-2013
Message 7 of 10 (258 Views)

Re: how to create expressionin structure reference alignment profile elevation

08-03-2013 11:19 AM in reply to: BrianHailey
autocad property?? what is that? Are you mean structure reference alignment.
*Expert Elite*
Jeff_M
Posts: 4,478
Registered: ‎07-22-2003
Message 8 of 10 (242 Views)

Re: how to create expressionin structure reference alignment profile elevation

08-03-2013 02:29 PM in reply to: manrajankalimuthu

When you add a label for the structure, as long as the label style has the refence text for a profile included, you will be prompted to select the profile to reference. You can always go back and change or set it in the Properties Palette. 

8-3-2013 2-26-09 PM.png

Jeff_M, also a frequent Swamper
Contributor
manrajankalimuthu
Posts: 25
Registered: ‎07-17-2013
Message 9 of 10 (219 Views)

Re: how to create expressionin structure reference alignment profile elevation

08-03-2013 10:25 PM in reply to: manrajankalimuthu
It is ok.how to add reference profile elevation into structure table column.
Contributor
manrajankalimuthu
Posts: 25
Registered: ‎07-17-2013
Message 10 of 10 (204 Views)

Re: how to create expressionin structure reference alignment profile elevation

08-04-2013 01:57 PM in reply to: manrajankalimuthu
Thank you
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Are You Going To Be @ AU 2014? Feel free to drop by our AU topic post and share your plans, plug a class that you're teaching, or simply check out who else from the community might be in attendance. Ohh and don't forgot to stop by the Autodesk Help | Learn | Collaborate booths in the Exhibit Hall and meet our community team if you get a chance!