Community
Civil 3D Forum
Welcome to Autodesk’s Civil 3D Forums. Share your knowledge, ask questions, and explore popular AutoCAD Civil 3D topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

how i get existing profile

10 REPLIES 10
SOLVED
Reply
Message 1 of 11
bigexploit
530 Views, 10 Replies

how i get existing profile

please how do i configure my profile so that the EXISTING ELEVATION LEFT, EXISTING ELEVATION RIGHT,EXISTING ELEVATION CENTER AND FG ELEVATION WILL APPEAR AT THE BOTTOM OF MY PROFILE  SIMULTANEOUSLY 

10 REPLIES 10
Message 2 of 11
doni49
in reply to: bigexploit

Create an alignment for each of those items and then project each alignment to the desired profile view.



Don Ireland
Engineering Design Technician




If a reply solves your issue, please remember to click on "Accept as Solution". This will help other users looking to solve a similar issue. Thank you.


Please do not send a PM asking for assistance. That's what the forums are for. This allows everyone to benefit from the question asked and the answers given.

Message 3 of 11
Jeff_M
in reply to: bigexploit

Create a copy of the Band, set the offset to be -25, set all of the Text components to not be visible, add 2 new text components, set the first to be for Profile 1, the other for Profile 2. Set the attachment for the first to be connected to the second profile of the last original text component, set the second one to be connected to the first new one....Make sense? Then you can select 2 different profiles for this band's labels.

2-22-2014 12-30-52 AM.png

 

Jeff_M, also a frequent Swamper
EESignature
Message 4 of 11
bigexploit
in reply to: bigexploit

thanks for your reply

is little confusing

can you show me step by step

thanks 

 

Message 5 of 11
Jeff_M
in reply to: bigexploit

Here's a video showing the steps:

 

 

 

Ad a link to the original in case this is too small: 

Jeff_M, also a frequent Swamper
EESignature
Message 6 of 11
bigexploit
in reply to: Jeff_M

Thank u for your selfless service. i really appreciatd. 

it works but i was looking for something like this

Message 7 of 11
Jeff_M
in reply to: bigexploit

So you want the bands to be like this?

 

2-22-2014 3-18-35 PM.png

Jeff_M, also a frequent Swamper
EESignature
Message 8 of 11
Jeff_M
in reply to: bigexploit

Attached is your drawing with the bands setup as your csv dispayed.

Jeff_M, also a frequent Swamper
EESignature
Message 9 of 11
bigexploit
in reply to: bigexploit

please sir can you explain more on this i cant get it. what steps do i need to take to achieve this.

thanks

 

Message 10 of 11
Jeff_M
in reply to: bigexploit

Did you examine the dwg I posted? It uses 4 band styles, each with a differnt title, with just the bottom one having the station component set to display. Then in the profileview properties, bands tab, set each of the bands to use a different profile.

Jeff_M, also a frequent Swamper
EESignature
Message 11 of 11
bigexploit
in reply to: bigexploit

waoooooooooooooh that is it. am very greatful. thanks alot

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Rail Community


Autodesk Design & Make Report