AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Reply
Valued Contributor
basman12
Posts: 81
Registered: ‎03-22-2011
Message 1 of 4 (1,739 Views)
Accepted Solution

how can we reverse alignment direction ???

1739 Views, 3 Replies
03-27-2011 12:23 PM

Hello everybody

is there is any way to reverse the alignment direction

Select the alignment the ribbon will change and on the tab with alignment properties - Superelevation ect. hit the flyout and there you will find reverse alignment. Make sure you use the flyout not the drop down from alignment properties

Mentor
miked
Posts: 164
Registered: ‎12-16-2003
Message 2 of 4 (1,736 Views)

Re: how can we reverse alignment direction ???

03-27-2011 01:18 PM in reply to: basman12

Select the alignment the ribbon will change and on the tab with alignment properties - Superelevation ect. hit the flyout and there you will find reverse alignment. Make sure you use the flyout not the drop down from alignment properties

NVIDIA Quadro 600
Civil3D 2012 64x
Contributor
Jozi68
Posts: 25
Registered: ‎07-23-2009
Message 3 of 4 (1,122 Views)

Re: how can we reverse alignment direction ???

01-22-2013 11:11 PM in reply to: basman12

How does one "hit the flyout"?  I cannot find this command.  I'm using C3D 2012.

*Expert Elite*
troma
Posts: 2,520
Registered: ‎05-21-2008
Message 4 of 4 (1,111 Views)

Re: how can we reverse alignment direction ???

01-23-2013 05:33 AM in reply to: Jozi68

The flyout is the part that "flies out" when you hit the little arrow on the bottom of the ribbon.


Credit where credit is due! Give kudos or accept as solution whenever you can.

Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.