AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Reply
Active Contributor
arcallupe
Posts: 41
Registered: ‎09-07-2011
Message 1 of 5 (242 Views)

Horizontal geometry data band

242 Views, 4 Replies
01-04-2012 06:27 AM

Hi friends:

 

I have a question about horizontal geometry data band. Here in Peru, the Manual for Road Design says that the horizontal diagram will be something like this image.... is it possible to do this in civil3d??.

 

Thanks

 

Horizontal diagram.jpg

Employee
peterfunkautodesk
Posts: 720
Registered: ‎08-25-2009
Message 2 of 5 (233 Views)

Re: Horizontal geometry data band

01-04-2012 08:02 AM in reply to: arcallupe

When I draw my alignment from left to right it produces a geometry band (using all the defaults) that match the bottom band in your picture (matching the standard in Peru). Curves to the left drop below the line, curves to the right rise above the line.

 

Cheers,

 

Peter Funk

Autodesk, Inc.



Peter Funk
Autodesk, Inc.

Active Contributor
arcallupe
Posts: 41
Registered: ‎09-07-2011
Message 3 of 5 (216 Views)

Re: Horizontal geometry data band

01-04-2012 10:36 AM in reply to: peterfunkautodesk

So sorry, there is a mistake in my picture!!! Change the text "Cicil3D" with "Design Manual". Thank you.

Employee
peterfunkautodesk
Posts: 720
Registered: ‎08-25-2009
Message 4 of 5 (209 Views)

Re: Horizontal geometry data band

01-04-2012 11:17 AM in reply to: arcallupe

Do you have a link or image from teh design manual?

 

Peter Funk

Autodesk, Inc.



Peter Funk
Autodesk, Inc.

Active Contributor
arcallupe
Posts: 41
Registered: ‎09-07-2011
Message 5 of 5 (119 Views)

Re: Horizontal geometry data band

01-17-2013 01:40 PM in reply to: peterfunkautodesk

Hi Peter:

 

Sorry for the big delay.

 

This is the manual DG 2001 Road Design. Mi question is if it is possible to do a mirror of the aligment diagram (maybe creating a new style) along the horizontal because here in Peru the diagram is in different direction that civil shows.

 

Thank you and sorry for the bad english.

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post