Horizontal alignment problem

[Anonymous]

Hello!



I'm reasonably new to Civil3D and I'm having trouble with creating
alignment. Here is the numeric data of the alignment created with different
software and I wasn't able to create it exactly the same. As you can see,
there are three reverse curves with clothoids between them. Lengths of these
spirals are the same and A-values differ. I thought that I could solve this
using twice command FLOATING REVERSE CURVE WITH SPIRALS (FROM CURVE, RADIUS,
THROUGH POINT) but I can't get Civil3D to create this elements. The other
way is to create every element one by one but that is really slow. Having a
strait between spirals is not an option.



Thanks!



---------------------------------------- 10985.084 5467544.71739
5016257.40204

A011 XC = 5467346.14889 578.924

YC = 5015586.15652

R = 700.000

---------------------------------------- 11564.008 5467974.57928
5015894.49926

A011 A = 283.72522 115.000

---------------------------------------- 11679.008 5468019.49510
5015788.67091

A011 A = 339.11650 115.000

---------------------------------------- 11794.008 5468063.54696
5015682.46099

A012 XC = 5468971.88591 485.892

YC = 5016100.69579

R = -1000.000

---------------------------------------- 12279.900 5468363.99388
5015306.67609

A012 A = 374.16574 140.000

---------------------------------------- 12419.900 5468478.98077
5015226.86707

A012 A = 374.16574 140.000

---------------------------------------- 12559.900 5468593.96765
5015147.05804

A013 XC = 5467986.07562 559.024

YC = 5014353.03835

R = 1000.000

---------------------------------------- 13118.923 5468922.54552
5014703.78630

[onsionsi1]

can you post your DWG 

Thank you

[troma]

Dear sadekcivil,

The user "Davorj" has an asterisk in front of the name, and also the name is plain text, not a clickable link.  This tells us that this user is no longer active.  In addition, this original post is over five years old.  In view of these facts, I very much doubt that this user will reply or post a drawing.