Community
Civil 3D Forum
Welcome to Autodesk’s Civil 3D Forums. Share your knowledge, ask questions, and explore popular AutoCAD Civil 3D topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

High point label in vertical profile

1 REPLY 1
Reply
Message 1 of 2
trynders
306 Views, 1 Reply

High point label in vertical profile

Hi all,

I have a verticval profile with a 5% grade, then a 50' vertical curve and then a -0.09% grade out.  I have the label set to label the high point but the high point is only a couple of feet from the PVC.  So the text is overlapping.  How can I change the HP stationing so I can drag it to a new location.  Like to the left a few feet.  I would like to keep the same format of vertical text as in the attachent "VerticalProfiles-1.  See attachment Vertical Profiles for my problem.

 

Thanks!

1 REPLY 1
Message 2 of 2
tcorey
in reply to: trynders

Put an offset on the High Point label component. See the Layout tab of the Label Style Composer.

 

Depending on the configuration of the existing line component, you might want to anchor its end point to the High Point label component.

 

 



Tim Corey
MicroCAD Training and Consulting, Inc.
Redding, CA
Autodesk Gold Reseller

New knowledge is the most valuable commodity on earth. -- Kurt Vonnegut

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Rail Community


Autodesk Design & Make Report