Community
Civil 3D Forum
Welcome to Autodesk’s Civil 3D Forums. Share your knowledge, ask questions, and explore popular AutoCAD Civil 3D topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

grading parking lot

5 REPLIES 5
Reply
Message 1 of 6
anamyslak
534 Views, 5 Replies

grading parking lot

Hello,
Can someone help me?
I need to create cogo with elevations for stake out of parking lot. What Is there most efficient way to do this in Civil 3d? Thanks so much.
5 REPLIES 5
Message 2 of 6
Anonymous
in reply to: anamyslak

I assume you've actually designed the lot already with a surface? Just
place points wherever you want and then use the "Elevations from surface"
tool to apply the proposed elevations. Then you can export them to your
data collector.

--
Matt Kolberg
Global CADD Systems - A division of Cansel
Message 3 of 6
anamyslak
in reply to: anamyslak

Hello Matt,
Thank you for your reply.
I will try to do this as I don't have much of experience with surfaces.
Thanks a lot again.
Message 4 of 6
Anonymous
in reply to: anamyslak

Good luck.

--
Matt Kolberg
Global CADD Systems - A division of Cansel

"anamyslak" wrote in message news:6329587@discussion.autodesk.com...
> Hello Matt,
> Thank you for your reply.
> I will try to do this as I don't have much of experience with surfaces.
> Thanks a lot again.
Message 5 of 6
anamyslak
in reply to: anamyslak

Matt,
I decided to do this in LDD 🙂
I'm creating points "as I go" - with elevations of eop and top of drainage structures. Do I need to create also pnts with elevations on the sewer structures or storm and eop will be efficient for my surface?
Then I plan to build surface from pnts that I created and do pnts, create pnts - surface, random points.
Can you tell me what you think about this?
thanks
Message 6 of 6
Anonymous
in reply to: anamyslak

I guess it really depends if you are planning to have grade breaks at those
sewer locations. If not, there should be no need to create points there if
you're planning on making a surface.

--
Matt Kolberg
Global CADD Systems - A division of Cansel

"anamyslak" wrote in message news:6329763@discussion.autodesk.com...
> Matt,
> I decided to do this in LDD 🙂
> I'm creating points "as I go" - with elevations of eop and top of drainage
> structures. Do I need to create also pnts with elevations on the sewer
> structures or storm and eop will be efficient for my surface?
> Then I plan to build surface from pnts that I created and do pnts, create
> pnts - surface, random points.
> Can you tell me what you think about this?
> thanks

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Rail Community


Autodesk Design & Make Report