AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Reply
*Jorge
Message 1 of 6 (111 Views)

Grading Layout tools target value

111 Views, 5 Replies
01-04-2005 08:10 AM
How to change in " Grading Layout tools " The target value ? Distance to Surface Thx
Employee
nzeeben
Posts: 1,102
Registered: ‎01-30-2004
Message 2 of 6 (111 Views)

Re: Grading Layout tools target value

01-04-2005 08:22 AM in reply to: *Jorge
You will need to alter the grading criteria, under the settings tab in the toolspace, expanding grading, then expand criteria sets. Under standard sets you will find the standard criteria you are using. You can then right click and choose edit.
*Jorge
Message 3 of 6 (111 Views)

Re: Grading Layout tools target value

01-04-2005 08:42 AM in reply to: *Jorge
Is locked. I can´t move it. "nzeeben" escribió en el mensaje news:11195216.1104855768443.JavaMail.jive@jiveforum2.autodesk.com... > You will need to alter the grading criteria, under the settings tab in the toolspace, expanding grading, then expand criteria sets. Under standard sets you will find the standard criteria you are using. You can then right click and choose edit.
Employee
nzeeben
Posts: 1,102
Registered: ‎01-30-2004
Message 4 of 6 (111 Views)

Re: Grading Layout tools target value

01-04-2005 09:32 AM in reply to: *Jorge
Your picture is of the grading layout tools dialog. You need to access the settings from the settings tab of the toolspace. You will then be able to adjust if a value is locked or unlocked.
*Jorge
Message 5 of 6 (111 Views)

Re: Grading Layout tools target value

01-04-2005 09:49 AM in reply to: *Jorge
The problem was the dwg. I Have try with a new one and everything ok. Thanks a lot :-) "nzeeben" escribió en el mensaje news:5253555.1104859955772.JavaMail.jive@jiveforum2.autodesk.com... > Your picture is of the grading layout tools dialog. You need to access the settings from the settings tab of the toolspace. You will then be able to adjust if a value is locked or unlcoked.
Employee
nzeeben
Posts: 1,102
Registered: ‎01-30-2004
Message 6 of 6 (111 Views)

Re: Grading Layout tools target value

01-04-2005 09:52 AM in reply to: *Jorge
No problem
Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.