AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Posts: 4
Registered: ‎11-13-2006
Message 1 of 2 (140 Views)

Grade Break Labels in View port

140 Views, 1 Replies
01-16-2014 12:04 PM

I am running Civil3D 2014 and have my design drawing with my topo x-refed in.  I have my surface data brought in from the topo to the design drawing via data shortcut.  I have a profile of my alignment and a design profile with it.  The grade break labels on the design profile by default are vertical and I dragged them to be horizontal (per the dragged state settings in the style).  When i view that profile in paper space in my viewport the grade break labels are still vertical.  I have regenerated, saved, closed and re-opened Civil3D.  I have checked properties, styles, etc.  I can not find a solution.  Has anyone ever seen this???  Please help!  Thanks!!



Active Member
Posts: 8
Registered: ‎11-27-2012
Message 2 of 2 (132 Views)

Re: Grade Break Labels in View port

01-16-2014 12:59 PM in reply to: seth

First thing I would be checking is that MS and the PS viewport are in the same UCS.   If not, try setting the PS viewport UCS to VIEW.

Next, I would be looking at the style settings. In here you can override the  "Dragged State" setting. 


Gerald Hammerling

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.