AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Reply
Active Contributor
MKWeb
Posts: 30
Registered: ‎08-17-2007
Message 21 of 25 (99 Views)

Re: 'Ghost' sections on Corridor cross sections

03-17-2014 01:14 PM in reply to: Jeff_M

Jeff, the issue is the ghost sections showing in track B that have the labels where they shouldn't be. Take a close look at the label placements for station 2+50 in the Track B sections. You will see labels are duplicated but in the wrong spot. This assembly should show in ALL sections up to 3+50 but it doesn't, even though the settings are the same for the entire section group.

Mark 'MKWeb' Hultgren
*Expert Elite*
Jeff_M
Posts: 4,519
Registered: ‎07-22-2003
Message 22 of 25 (93 Views)

Re: 'Ghost' sections on Corridor cross sections

03-17-2014 01:29 PM in reply to: MKWeb

There are line & text objects that look like they were labels at one time but have been exploded. Perhaps these are left over from a different Assembly, or the sectionviews shrunk but since the labels were exploded did not relocate themselves? I suggest deleting these as they are no longer dynamic to the sections or sectionviews. There are also some manually placed Offset/Elevation labels that appear to need relocating, but these were not placed automatically by C3D.

 

I am seeing 2 assemblies (for 2 baselines) for Track B stations 0+00 through 4+50. Although at 0+00 & 0+50 I can only tell there are 2 from the labels which show these 2 baselines to differ in elevation by 0.02.

 

3-17-2014 1-30-49 PM.png

Jeff_M, also a frequent Swamper
Active Contributor
MKWeb
Posts: 30
Registered: ‎08-17-2007
Message 23 of 25 (71 Views)

Re: 'Ghost' sections on Corridor cross sections

03-20-2014 06:30 AM in reply to: Jeff_M
Hi Jeff,
What version of C3D did you open this in? Because the labels in my drawing are showing as actual labels (Not text and linework) Maybe that is part of the problem. They may have become corrupted when the drawing crashed on the OP and even though I ran an audit and recover on the files in question, maybe 2012 didn't pick up the problem and still saw them as C3D section labels?
Mark 'MKWeb' Hultgren
*Expert Elite*
doni49
Posts: 2,019
Registered: ‎12-22-2012
Message 24 of 25 (68 Views)

Re: 'Ghost' sections on Corridor cross sections

03-20-2014 08:04 AM in reply to: MKWeb
I don't know about Jeff, but I opened it in C3D 2012 and had labels as text and lines.
Don Ireland



If a reply solves your issue, please remember to click on "Accept as Solution". This will help other users looking to solve a similar issue. Thank you.






Forum links:
AutoCAD 2013/2014/2015
AutoCAD 2010/2011/2012

AutoLISP, VB and other AutoCAD customization


Civil 3D General
Civil 3d Customization


Other Helpful links:
My File is too large to post or I can't post it due to privacy issues!
*Expert Elite*
Jeff_M
Posts: 4,519
Registered: ‎07-22-2003
Message 25 of 25 (65 Views)

Re: 'Ghost' sections on Corridor cross sections

03-20-2014 08:09 AM in reply to: MKWeb
I used C3D 2012, Mark. Most of the labels are labels generated by the CodeSetStyle. Some of them are OffsetElevation labels, and others appear to be exploded OffsetElevation labels.
Jeff_M, also a frequent Swamper
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.