Hey Chris;
Field Survey has not been integrated into Civil 3D as of the current
version, so to get the functionality you're looking for you'll still need to
use that for the interim. Or Land, as I was able to get the Lines/Curves
"From End of Object" to work as you had explained the parameters you were
looking for. I used an existing arc, and indicated which end I wanted to
start from; gave it the radius and delta; and the arc was drawn. This was in
my version, LDT3.
It was pointed out recently that FS 2006 bears a strong resemblance to Civil
3D, so that may be an indicator of things to come. When is a different
story. Being that its the weekend, you may get a better answer on Monday.
--
Don Reichle
"King Of Work-Arounds"
"The only thing worse
than training your staff,
and having them leave is -
not training your staff,
and having them stay."
Courtesy Graphics Solution Providers
--------------------------------------
LDT3/CD3
IntelP4-2.4
1GB RAM
Intel 64MB
wrote in message news:4831397@discussion.autodesk.com...
I have played with the curve pulldowns as you showed, but I still have not
been able to get it to draw the right kind of curve..for example....I draw a
lot survey where the front of the lot is on a 150' radius curve....I draw
the other 3 sides of the rectangular lot. What command will give the ability
to draw a curve from one lot corner to the other lot corner with 150'
radius...in field survey it askes you for the PC, radius, and the chord....
Thanks....I got the layer transfer to work...