AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Reply
Active Member
kkukuk
Posts: 7
Registered: ‎06-20-2013
Message 1 of 5 (114 Views)

Fatal Error

114 Views, 4 Replies
11-05-2013 01:24 PM

I get a fatal error message: Unhandled Access Violation Reading 0x7ffffffd Exception at 6d9cc265h when i try to do anything in a drawing. Has anyone seen this error type before?  

*Expert Elite*
Jay_B
Posts: 2,660
Registered: ‎09-15-2010
Message 2 of 5 (102 Views)

Re: Fatal Error

11-05-2013 02:30 PM in reply to: kkukuk

Version of Civil 3d?

In all drawings or 1 drawing?

Have you tried opening with the RECOVER command?

Jay

C3D 2014 SP2
Win 7 Professional 64 Bit
Active Member
kkukuk
Posts: 7
Registered: ‎06-20-2013
Message 3 of 5 (100 Views)

Re: Fatal Error

11-05-2013 02:38 PM in reply to: Jay_B
Civil 3D 2014. I have not opened with the recover command but it just seems to be this one drawing and it just started today. I have run purge and audit on the drawing with no luck.
Member
johnmcintoshtsc
Posts: 3
Registered: ‎02-03-2013
Message 4 of 5 (81 Views)

Re: Fatal Error

11-05-2013 05:06 PM in reply to: kkukuk

Yes, seen this many times before over the years. I have tried many things to fix, such as saving back to earlier versions, saving as DXF. Sometimes it fixes, sometimes it doesn't.

Mentor
Nik-D
Posts: 216
Registered: ‎09-10-2012
Message 5 of 5 (66 Views)

Re: Fatal Error

11-06-2013 01:50 AM in reply to: kkukuk

Do you have access to an earlier version of Civil 3D? If so can you open and modify with this (you will get a notice regarding proxy graphics and earlier version) and see if you can copy all objects to a new drawing.

 

Does the drawing have XREFs? If so unload them using the reference manager (I think you can) or with an earlier version of civil 3D

 

As said earlier can you save as a DXF file? and copy all objects to a new file?

 

Can you WBLOCK the objects out of the drawing?

 

Have you installed any other software recently that may be interfering with your Civil 3D or the amount of memory you have access to?

 

HTH

 

Nik-D

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Are You Going To Be @ AU 2014? Feel free to drop by our AU topic post and share your plans, plug a class that you're teaching, or simply check out who else from the community might be in attendance. Ohh and don't forgot to stop by the Autodesk Help | Learn | Collaborate booths in the Exhibit Hall and meet our community team if you get a chance!