Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
I am trying to extract a feature line from a corridor and draw it in my profile view. This goes well except the profile line comes in 10000 metres lower than it should. I should mention the feature line is a ditch and it comes in 10000m lower than my Finished Ground Centreline. I am using C3D 2011.
OK, I figured out half of the problem. It is placing the start of my feature line from the corridor at 0 elevation and from there the rest is at proper elevation. So how do I get the starting elevation to proper elevation?
extend your profile a small amount beyond your corridor station range start and finish
Your Name Did you find this post helpful? Feel free to Like this post. Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
![Autodesk Design & Make Report](https://forums.autodesk.com/t5/image/serverpage/image-id/1350519iCB55845EBFC43016/image-size/large?v=v2&px=999" "Autodesk Design & Make Report")