Community
Civil 3D Forum
Welcome to Autodesk’s Civil 3D Forums. Share your knowledge, ask questions, and explore popular AutoCAD Civil 3D topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

elevation range broken

1 REPLY 1
Reply
Message 1 of 2
Anonymous
205 Views, 1 Reply

elevation range broken

I created a surface style to show elevation ranges, but it doesn't seem to
work. I set it to around 10 elevation ranges in Green & that worked, but
now if I try and change the style again, it has no effect at all on the
display. I tried various numbers of elevation ranges & most of the color
schemes as well as "2D solids" and "hatch solids" but it always stays in the
original green style that I created.


Jon Rizzo
Langan Engineering and Environmental Services, Inc.
1 REPLY 1
Message 2 of 2
Anonymous
in reply to: Anonymous

Hi Jon

The number of ranges, color scheme, etc need to be set in the "Properties"
dialog. Pick the object, right click, select properties. Once in the
Properties dialog, go to the "Analysis" tab and set the range values as
desired. Make sure you set the range type (ie, elevation, slope, contours,
etc)

Cheers
DAS

"Jon Rizzo" wrote in message
news:C1BCD552EB660F809438C0E76F2A74EE@in.WebX.maYIadrTaRb...
> I created a surface style to show elevation ranges, but it doesn't seem to
> work. I set it to around 10 elevation ranges in Green & that worked, but
> now if I try and change the style again, it has no effect at all on the
> display. I tried various numbers of elevation ranges & most of the color
> schemes as well as "2D solids" and "hatch solids" but it always stays in
the
> original green style that I created.
>
>
> Jon Rizzo
> Langan Engineering and Environmental Services, Inc.
>
>

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Rail Community


Autodesk Design & Make Report