AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Reply
Member
jagreve
Posts: 3
Registered: ‎11-20-2012
Message 1 of 4 (320 Views)

ECW image shifting within paper space

320 Views, 3 Replies
12-02-2012 08:24 PM

Problem: ECW image shifting within paperspace layout. Problem only with viewports which have been twisted.

 

Computer:

Windows 7 64bit

32gig ram

Quadro 2000 (on the supported list)

Using Civil3d 2012

 

Have tried recovering... moving the geometry is not an option.

Have also tried toggling "Projection" on and off as suggested in other threads

 

This seems to have been a long standing issue and its surprising there yet seems to be a fix

Have made the same post in an AutoCAD 2011 as a reply to a board on the same issue. Link: http://forums.autodesk.com/t5/AutoCAD-2011/Image-shifting-in-Paper-Space-quot-Autocad-2011-quot/m-p/...

Valued Mentor
KirkNoonan
Posts: 453
Registered: ‎09-23-2008
Message 2 of 4 (292 Views)

Re: ECW image shifting within paper space

12-03-2012 04:41 AM in reply to: jagreve

Try switching the insertion method (Map Insert vs.. FDO attach). There is an outside chance that it might help. Otherwise, open a support request. You will inevitably get the official "known issue" response, but if there are enough of them on the pile they might eventually fix it.

*Pro
dgordon
Posts: 1,474
Registered: ‎12-14-2006
Message 3 of 4 (287 Views)

Re: ECW image shifting within paper space

12-03-2012 05:11 AM in reply to: jagreve

I've seen the image shifting when zooming in and out before.    As long as it plots the same way every time it's only been a annoyance not a problem.   It would be nice if they fixed it, but it's not high on my priority list.

 

 

Dan

Civil 3D 2013
Win 7 Pro x64
Intel Xeon 2.0GHz
12Gb Ram
ATI Firepro 4800
Dell T5500
www.preinnewhof.com
Valued Mentor
KirkNoonan
Posts: 453
Registered: ‎09-23-2008
Message 4 of 4 (286 Views)

Re: ECW image shifting within paper space

12-03-2012 05:17 AM in reply to: dgordon
Therein lies the problem - Sometimes it looks fine, but it always plots incorrectly Kirk Noonan Carter Associates, Inc.P (772) 562-4191 F (772) 562-7180
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Are You Going To Be @ AU 2014? Feel free to drop by our AU topic post and share your plans, plug a class that you're teaching, or simply check out who else from the community might be in attendance. Ohh and don't forgot to stop by the Autodesk Help | Learn | Collaborate booths in the Exhibit Hall and meet our community team if you get a chance!