AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Reply
Member
jagreve
Posts: 3
Registered: ‎11-20-2012
Message 1 of 4 (290 Views)

ECW image shifting within paper space

290 Views, 3 Replies
12-02-2012 08:24 PM

Problem: ECW image shifting within paperspace layout. Problem only with viewports which have been twisted.

 

Computer:

Windows 7 64bit

32gig ram

Quadro 2000 (on the supported list)

Using Civil3d 2012

 

Have tried recovering... moving the geometry is not an option.

Have also tried toggling "Projection" on and off as suggested in other threads

 

This seems to have been a long standing issue and its surprising there yet seems to be a fix

Have made the same post in an AutoCAD 2011 as a reply to a board on the same issue. Link: http://forums.autodesk.com/t5/AutoCAD-2011/Image-shifting-in-Paper-Space-quot-Autocad-2011-quot/m-p/...

Valued Mentor
KirkNoonan
Posts: 424
Registered: ‎09-23-2008
Message 2 of 4 (262 Views)

Re: ECW image shifting within paper space

12-03-2012 04:41 AM in reply to: jagreve

Try switching the insertion method (Map Insert vs.. FDO attach). There is an outside chance that it might help. Otherwise, open a support request. You will inevitably get the official "known issue" response, but if there are enough of them on the pile they might eventually fix it.

*Pro
dgordon
Posts: 1,472
Registered: ‎12-14-2006
Message 3 of 4 (257 Views)

Re: ECW image shifting within paper space

12-03-2012 05:11 AM in reply to: jagreve

I've seen the image shifting when zooming in and out before.    As long as it plots the same way every time it's only been a annoyance not a problem.   It would be nice if they fixed it, but it's not high on my priority list.

 

 

Dan

Civil 3D 2013
Win 7 Pro x64
Intel Xeon 2.0GHz
12Gb Ram
ATI Firepro 4800
Dell T5500
www.preinnewhof.com
Valued Mentor
KirkNoonan
Posts: 424
Registered: ‎09-23-2008
Message 4 of 4 (256 Views)

Re: ECW image shifting within paper space

12-03-2012 05:17 AM in reply to: dgordon
Therein lies the problem - Sometimes it looks fine, but it always plots incorrectly Kirk Noonan Carter Associates, Inc.P (772) 562-4191 F (772) 562-7180
Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.