Community
Civil 3D Forum
Welcome to Autodesk’s Civil 3D Forums. Share your knowledge, ask questions, and explore popular AutoCAD Civil 3D topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Earthworks for assembly Sub-Base

1 REPLY 1
Reply
Message 1 of 2
civman_daar
290 Views, 1 Reply

Earthworks for assembly Sub-Base

C3D 2012 SP3 on Win 7 Pro.

 

I want to generate a report by sample line station that gives me the cut/fill quantities between my assembly(s) sub-base links and the existing ground.  I have section sheets cut with sample lines and the EG surface DREF'd.  Am I correct in assuming that you need to create the sub-base surface, (for every corridor, I have 18), to be able to get the cut/fill volumes?  The corridor is Xref'd into the section cut sheets, so no hope of generating a surface in the cut sheets from the corridor.  Can you have the EG surface defined in the Edit Material List and the sub-base as a corridor shape and get the cut/fill volumes?  I have tried and I get zeros in the earthworks report.  What am I doing wrong?

1 REPLY 1
Message 2 of 2
civman_daar
in reply to: civman_daar

Apparently you cannot mix shapes and surfaces to get cut/fill volume reports.  Cut/fill is driven by surfaces.  You can get volume quantities from shapes.  Am I correct here?

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Rail Community


Autodesk Design & Make Report