AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Reply
*Comerford, Laurie
Message 1 of 3 (175 Views)

DTM Build methods

175 Views, 2 Replies
11-20-2003 08:16 AM
Hi,

If you use Civil 3D to build a DTM from contours only (scanned hand drawings
from the early 1900s, no DTM was ever contemplated),
does it have any krigging type tools to help interpret the shape of the data
inside peak and hollow contours and re-entrant contours. Or are the tools
the same as in ALD - a face flipping type process ?



--

Regards



Laurie Comerford
CADApps Australia
email laurie@cadapps.com.au
web www.cadapps.com.au
*Simeone, Dave
Message 2 of 3 (175 Views)

Re: DTM Build methods

11-20-2003 09:53 AM in reply to: *Comerford, Laurie
Hi Laurie - Surface smoothing using the Kriging method (or Natural Neighbor
Interpolation) is available as a surface edit, but I'm not sure if that's
what your looking for. Do you need the program to add a high/low point at
the tops of hills, bottom of holes in the surface (when creating surface
from plines)?

Cheers
DAS

"Laurie Comerford" wrote in message
news:0462ED435F033C004B6A4F99572C0484@in.WebX.maYIadrTaRb...
> Hi,
>
> If you use Civil 3D to build a DTM from contours only (scanned hand
drawings
> from the early 1900s, no DTM was ever contemplated),
> does it have any krigging type tools to help interpret the shape of the
data
> inside peak and hollow contours and re-entrant contours. Or are the tools
> the same as in ALD - a face flipping type process ?
>
>
>
> --
>
> Regards
>
>
>
> Laurie Comerford
> CADApps Australia
> email laurie@cadapps.com.au
> web www.cadapps.com.au
>
>
>
>
*Comerford, Laurie
Message 3 of 3 (175 Views)

Re:

11-21-2003 09:52 AM in reply to: *Comerford, Laurie
Hi Dave,

I've managed to do some testing now in Civil 3D and found that the software
does not create surface interpretations in the circumstances I described.
I've attached 4 screen grabs of the experiment which I think illustrate the
situation. The white line shown in the view with the contours is a hand
drawn polyline at a non integer value. The other starting polylines I drew
probably don't show in the screen grabs.

I guess I'm not surprised that this is the case. It would take some
seriously complex decision making to extrapolate levels into the area on the
right.

--


Laurie Comerford
CADApps
www.cadapps.com.au

"Dave Simeone" wrote in message
news:F27DC5BA9BE81EAB005B2D51307776D7@in.WebX.maYIadrTaRb...
> Hi Laurie - Surface smoothing using the Kriging method (or Natural
Neighbor
> Interpolation) is available as a surface edit, but I'm not sure if that's
> what your looking for. Do you need the program to add a high/low point at
> the tops of hills, bottom of holes in the surface (when creating surface
> from plines)?
>
> Cheers
> DAS
>
> "Laurie Comerford" wrote in message
> news:0462ED435F033C004B6A4F99572C0484@in.WebX.maYIadrTaRb...
> > Hi,
> >
> > If you use Civil 3D to build a DTM from contours only (scanned hand
> drawings
> > from the early 1900s, no DTM was ever contemplated),
> > does it have any krigging type tools to help interpret the shape of the
> data
> > inside peak and hollow contours and re-entrant contours. Or are the
tools
> > the same as in ALD - a face flipping type process ?
> >
> >
> >
> > --
> >
> > Regards
> >
> >
> >
> > Laurie Comerford
> > CADApps Australia
> > email laurie@cadapps.com.au
> > web www.cadapps.com.au
> >
> >
> >
> >
>
>
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Are You Going To Be @ AU 2014? Feel free to drop by our AU topic post and share your plans, plug a class that you're teaching, or simply check out who else from the community might be in attendance. Ohh and don't forgot to stop by the Autodesk Help | Learn | Collaborate booths in the Exhibit Hall and meet our community team if you get a chance!