drawing line in profile view

[rfg018]

I'm look for a transparent command or command to draw a vertical line (or profile) at a know point and a vertical distance using the profile view. Example would be a curb&gutter, or a wall footing.

Note: In LDD I use length and elevation differents.

Thanks

[Joe-Bouza]

Its been along ime since I've beenin front of LDT, and I'nnot in front of civil3d at this time, but there is a similar transparent command tool bar.

[JeffPaulsen]

There are 4 different profile view commands on the transparent command tool bar Joe mentioned above. You can also type the commands when being promted for a point ('PSE, 'PGS, 'PGE & 'PGL).