Dear sir,
How shall I draw lines into a created surface using raw or full description of ascii file format(COGO)
for example in the imported file ihave points to describe a road centre line(CL),or edge of the road(ERD),breaklines(BRKL) and want lines represented by the descriptions to be drawed in the surface so that i can use the lines as guides in profiles design.I didn't want to use point number which are not serially ,and have tried to use point grouping without any success
The attached file could be of good use
Engr Bashiru Lawal
That Txt file does not contain descriptions. Also, it the description are not set up properly when collected it will be more difficult. See This and This.
You may be able to separate them into groups and draw lines by group entering G for group. I can't test that right now.
Allen Jessup
Allen Jessup
CAD Manager - Designer
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
I wrote a lisp to do what I think you need a number of years ago. It would need some updating to work with newer versions, but there is plenty of information on the C3D customization forum that shows how to do that. OLD LISP LINK