AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Reply
Active Member
6 Posts
0 Kudos
Registered: ‎01-06-2013
Post 1 of 3

Different alignment offsets with the same profile

469 Views, 2 Replies
01-10-2013 05:13 PM

Hello,

 

I created a profile for an alignment (which has 2 offsets) and also an assembly with two assembly offsets.

I wanted to create a corridor where my assembly offsets will have the same profile but will be on different alignments  (alignment offsets).

 

In the corridor properties / parameters, I got an error : duplicate profile found.

 

Should I copy the profile (for each offset) in different profile views (for each offset) ? Or there is a better way to do that ?

Thank you.

Active Member
6 Posts
0 Kudos
Registered: ‎01-06-2013
Post 2 of 3

Re: Different alignment offsets with the same profile

01-10-2013 07:03 PM in reply to: dyoxyne

One more question, the alignment offset has a type : offset (logical) but I can't apply cant to it.
I changed it to : Rail but I don't think it's a good way.

Anyone knows ?

*Expert Elite*
109 Posts
10 Kudos
Registered: ‎06-21-2011
Post 3 of 3

Re: Different alignment offsets with the same profile

01-11-2013 09:06 AM in reply to: dyoxyne

Hello

 

To use a project profile on an offset alignment, you need to create the profile of the surface for the alignment offset, and then use the command _AeccSuperimposeProfile to profile the central alignment be used in Offset.

 

bye

Adriano Oliveira

*Expert Elite*
MaxiCAD Informática
www.maxicad.com.br
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post