Another solution would be to add breaklines at the corners from the inside to the outside curve, similar to what the software does with grading objects. This should force the surface to triangulate better.
Interesting. I will try this as well. Thanks Steve.
make the boundary which is the TOB and BOB 3D polyline and then add them as contours and select the swaping edges and unselect the filling gaps in contour data....make the distance .1, angle .001.00000, distance 1 and mid-ordinate .5 and that should work perfect
That worked like a charm!!
Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.