AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Reply
Valued Contributor
90 Posts
0 Kudos
Registered: ‎09-02-2007
Post 11 of 20

Re: Designing roundabout

08-25-2008 06:31 AM in reply to: patrick.ericson
Hi Tim.

Still waiting for our IT-crew to install it. It were forgotten by one guy, so i'll hope i can check it out in just a few weeks ;(
*Laurie Comerford
Post 12 of 20

Re: Designing roundabout

08-25-2008 06:47 AM in reply to: patrick.ericson
Hi Patrick,

I can't comply with your request on "favourite methods and without third
party". I use ARD which enables completion of the design in not much
longer than it takes to write this message.

Why not have a look at www.civil3dtools.com for Corridor-EZY Lite which
provides this functionality at the retail price of $0.00?

Regards


Laurie Comerford

Patrickpatrick.ericson wrote:
> Hi all!
>
> Thanks for your replies!!! I'm realy grateful for all your response when problems and questions come up!! Hope i maybe can help you to some day :smileywink:
>
> THANKS!!!!
>
> Do you have any favoritetips how to create roundabouts and intersections.......only with civil3d, no third part apps, or do you use same methods like Jack Strongitharm does? (See earlier post)
>
>
>
> //Patrick
Valued Contributor
93 Posts
0 Kudos
Registered: ‎08-24-2007
Post 13 of 20

Re: Designing roundabout

08-25-2008 08:49 AM in reply to: patrick.ericson
Had a good laugh at that one Laurie. Its so true.
Valued Contributor
90 Posts
0 Kudos
Registered: ‎09-02-2007
Post 14 of 20

Re: Designing roundabout

08-25-2008 11:29 PM in reply to: patrick.ericson
Hi!

Have been drawling over it since i saw a webcast where they made intersections.....all of it in no time at all.

I asked this question before. Does Corridor_EZY Lite work for the swedish/europeen market =>Meter instead och inch/feet?
If it does....then i got to try it out.

/Patrick Message was edited by: patrick.ericson
*Laurie Comerford
Post 15 of 20

Re: Designing roundabout

08-26-2008 12:31 AM in reply to: patrick.ericson
Hi Patrick,

If you send me an Email, I'll pass it to the appropriate person.

laurie
DOT
comerford
AT
westnet
DOT
com
DOT
au

Regards


Laurie Comerford

Patrickpatrick.ericson wrote:
> Hi!
>
> Have been drawling over it since i saw a webcast where they made intersections.....all of it in no time at all.
>
> I asked this question before. Does Corridor_EZY Lite work for the swedish/europeen market =>Meter instead och inch/feet?
> If it does....then i got to try it out.
>
> /Patrick
>
> Message was edited by: patrick.ericson
Contributor
18 Posts
0 Kudos
Registered: ‎08-07-2008
Post 16 of 20

Re: Designing roundabout

08-26-2008 06:07 AM in reply to: patrick.ericson
Hi Patrick,

I answered before on another post.
I represent CadApps Australia in Europe.
The name of Corridor-Ezy here is Advanced Road Design (ARD) and is already succesfull in couple of countries in Eastern Europe

Please feel free to send me an email for more information so I can organize for you a web presentation too.

Thank you

Florin Balcu
MaxCAD International
florin dot balcu at maxcad dot ro
Valued Contributor
90 Posts
0 Kudos
Registered: ‎09-02-2007
Post 17 of 20

Re: Designing roundabout

08-26-2008 09:36 AM in reply to: patrick.ericson
Hi!

I saw a webcast of, think it was, Corridor EZY and it looked real nize.
Do you know if there are any swedish users?

//Patrick
Contributor
18 Posts
0 Kudos
Registered: ‎08-07-2008
Post 18 of 20

Re: Designing roundabout

08-26-2008 11:39 AM in reply to: patrick.ericson
Hi Patrick,

I have designed a couple of roundabouts in Romania using just ARD (Advanced Road Design)
Has specific and dynamic features to automatically match at intersections the intersected roads and to vertically design the kerb returns and the inner and outer circles of the roundabout.
Is so neat and fast.
With automated plan and profiles drawings

Should you require more information do not hesitate to contact me.

Kind regards

Florin Balcu
florin dot balcu at maxcad dot ro
Bucharest, Romania
Contributor
18 Posts
0 Kudos
Registered: ‎08-07-2008
Post 19 of 20

Re: Designing roundabout

09-18-2008 01:49 PM in reply to: patrick.ericson
Hi Patrick,

Do you need any help on Corridor - Ezy or ARD software?
I can help you here in Europe.

Thank you

BE(Civ) Florin Balcu
MaxCAD International
CadApps European Distributor
Valued Contributor
50 Posts
0 Kudos
Registered: ‎04-15-2008
Post 20 of 20

Re: Designing roundabout

10-07-2008 08:44 AM in reply to: patrick.ericson
The link you had posted for the roundabout tutorial was old. Do you have another place to look?

Thanks.
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post