Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
Is there anyway that I can create HWL based on 4:1 slope down from existing property line's grade, since my existing property line's grades varies from 780 to 800. Then I don't have to use my hand calculation to find out my HWL location.
Yup. I would create a feature line along the property line, extract elevations from your existing surface. Next you may need create a grading criteria set that allows you to create a set slope to an absolute elevation. Set the grading target to elevation, then set your known parameters. Create your grading group off of the feature line and you should be good to go. However, you will want to walk with tender steps with the grading tools..
![Autodesk Design & Make Report](https://forums.autodesk.com/t5/image/serverpage/image-id/1350519iCB55845EBFC43016/image-size/large?v=v2&px=999" "Autodesk Design & Make Report")