AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Reply
Valued Contributor
bo.martin
Posts: 65
Registered: ‎06-12-2010
Message 1 of 3 (145 Views)
Accepted Solution

Description Keys Settings

145 Views, 2 Replies
05-05-2012 10:15 AM

For some reason in my base template for field work the

"Diasble Description Keys" option in Points  Creation is set to "true"

How can make this default to "False" in my template.

I've tried changing it and then saving the template again but it reverts to true

all of the time. This is irratiting because I have

to select my points and do applydesckeys whenever I import points.

 

Thanks,

 

Bo

Open the DWT file, go to the Settings tab of Toolspace, expand Points, expand Commands, dbl click CreatePoints, change the setting here. If you were changing setting under the PointCreation dialog, those settings are normally only used during the tie that dialog is open.

 

If this isn' working, then you'd better verify that the correct dwt is being used for starting new drawings.

*Expert Elite*
Jeff_M
Posts: 4,433
Registered: ‎07-22-2003
Message 2 of 3 (139 Views)

Re: Description Keys Settings

05-05-2012 12:18 PM in reply to: bo.martin

Open the DWT file, go to the Settings tab of Toolspace, expand Points, expand Commands, dbl click CreatePoints, change the setting here. If you were changing setting under the PointCreation dialog, those settings are normally only used during the tie that dialog is open.

 

If this isn' working, then you'd better verify that the correct dwt is being used for starting new drawings.

Jeff_M, also a frequent Swamper
Valued Contributor
bo.martin
Posts: 65
Registered: ‎06-12-2010
Message 3 of 3 (135 Views)

Re: Description Keys Settings

05-05-2012 12:57 PM in reply to: Jeff_M

Ahh!!! Thats where it is!!!

 

Thanks!!!

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.