Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
Is there a way to show the deflection angle between incoming and outgoing pipes in a structure label? Or any label at all, for that matter? I know it can be done with alignments at the PI point, but only in the source drawing.
I realize this is an old post but searching for newer post didn't reveal much on the topic.
Has anyone been able to come up with a solution for this?
This is something we are needing for one of our projects. I would hate to manually add this to the label but so far that looks like it might be the quickest solution so far. That or create an alignment for all the pipe runs and use the PI label example shown on another post.
Civil 3D 2024 / Windows 11 Pro (64bit) Intel Core I7 @3.30GHz / 32gig RAM / NVIDIA Quadro K2200
![Autodesk Design & Make Report](https://forums.autodesk.com/t5/image/serverpage/image-id/1350519iCB55845EBFC43016/image-size/large?v=v2&px=999" "Autodesk Design & Make Report")