AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Reply
Distinguished Contributor
SurveyorLee
Posts: 128
Registered: ‎12-23-2008
Message 11 of 27 (282 Views)

Re: Dealing with AECC_COGO_POINTs

10-31-2012 04:48 PM in reply to: J_Seeds

To get around that, I went in and created a special text style the is annotative at 1"=1'.  I created mine at 0.06' (Leroy 60).

Tne when the points are inserted at 1"=1', they come in corrrectly.  Since the text type is annotative, the size will automatically rescale to Leroy 60.  So you can change the scale and the points and symbols will re-scale.

 

Surveyor Lee

*Expert Elite*
AllenJessup
Posts: 6,170
Registered: ‎05-21-2003
Message 12 of 27 (272 Views)

Re: Dealing with AECC_COGO_POINTs

11-01-2012 05:49 AM in reply to: J_Seeds

You might be able to handle it using an expression the way I handle the text height. See my post [Here].

 

Allen

*Expert Elite*
troma
Posts: 2,525
Registered: ‎05-21-2008
Message 13 of 27 (267 Views)

Re: Dealing with AECC_COGO_POINTs

11-01-2012 07:38 AM in reply to: AllenJessup

That looks familiar!  :smileywink:


Credit where credit is due! Give kudos or accept as solution whenever you can.

*Expert Elite*
AllenJessup
Posts: 6,170
Registered: ‎05-21-2003
Message 14 of 27 (265 Views)

Re: Dealing with AECC_COGO_POINTs

11-01-2012 07:44 AM in reply to: troma

Yes. I knew it had been mentioned.:smileyhappy: But sometimes a second opinion, although exactly the same, will help someone along the right track.:smileywink:

 

Allen

*Expert Elite*
troma
Posts: 2,525
Registered: ‎05-21-2008
Message 15 of 27 (260 Views)

Re: Dealing with AECC_COGO_POINTs

11-01-2012 08:17 AM in reply to: AllenJessup

Fair 'nuf.  Nice theory. :smileywink:


Credit where credit is due! Give kudos or accept as solution whenever you can.

*Expert Elite*
AllenJessup
Posts: 6,170
Registered: ‎05-21-2003
Message 16 of 27 (256 Views)

Re: Dealing with AECC_COGO_POINTs

11-01-2012 08:22 AM in reply to: troma

troma wrote:

Nice theory


And I'm standing buy it! Truly I did remember that it had been mentioned. But I only reread the original post. So I hadn't remembered you'd covered it in full detail.

Redundancy never hurts. Belt and suspenders and all that. How many people here in the North East wish they had a redundant power supply!

 

Allen

*Expert Elite*
troma
Posts: 2,525
Registered: ‎05-21-2008
Message 17 of 27 (247 Views)

Re: Dealing with AECC_COGO_POINTs

11-01-2012 09:26 AM in reply to: AllenJessup

Truly, tautology is so redundant!

 

The 'nice theory' I was referring to is that repetition will actually persuade someone to pay attention; not that you knew you were repeating. I believe you.


Credit where credit is due! Give kudos or accept as solution whenever you can.

Contributor
J_Seeds
Posts: 12
Registered: ‎01-07-2011
Message 18 of 27 (243 Views)

Re: Dealing with AECC_COGO_POINTs

11-01-2012 09:53 AM in reply to: troma

Allen, I tried your expression solution and it does what I want when the point label is in its "home position" however I'm not able to apply the expression to the text height in dragged state mode. Am I missing something? BTW I'm working in 2010 not sure if 2012 or 13 is different.

*Expert Elite*
troma
Posts: 2,525
Registered: ‎05-21-2008
Message 19 of 27 (238 Views)

Re: Dealing with AECC_COGO_POINTs

11-01-2012 10:14 AM in reply to: J_Seeds

Can you set the dragged state to 'As Composed' ?


Credit where credit is due! Give kudos or accept as solution whenever you can.

*Expert Elite*
AllenJessup
Posts: 6,170
Registered: ‎05-21-2003
Message 20 of 27 (237 Views)

Re: Dealing with AECC_COGO_POINTs

11-01-2012 10:15 AM in reply to: J_Seeds

In the Label Style Composer, on the Dragged State tab, under Dragged State Components the Display must be As Composed not Stacked Text. You can't put in an expression for text height in the stacked text.

 

Allen

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.