Community
Civil 3D Forum
Welcome to Autodesk’s Civil 3D Forums. Share your knowledge, ask questions, and explore popular AutoCAD Civil 3D topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

“Datum” in the “compute material”,

4 REPLIES 4
Reply
Message 1 of 5
JamaL9722060
1146 Views, 4 Replies

“Datum” in the “compute material”,

“Datum” in the “compute material”,

 

I’m not sure about the correct choice for the “datum” to proceed in plotting “mass haul diagram”

 

What might be the proper selection for the “datum”?

 

Thank you

Best

Jamal

 

Clip_221.jpg

---------------------------
Jamal Numan
4 REPLIES 4
Message 2 of 5
Joe-Bouza
in reply to: JamaL9722060

Create a surface from your corridor and select "datum" then it will show up in the compute materials list

Thank you

Joseph D. Bouza, P.E. (one of 'THOSE' People)

HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram


Note: Its all Resistentialism, so keep calm and carry on

64 Bit Win10 OS
Message 3 of 5
JamaL9722060
in reply to: Joe-Bouza

Many thanks for the help.

 

What does it say no “No Corridor Surface exists to create”

 

Clip_235.jpg

---------------------------
Jamal Numan
Message 4 of 5
Joe-Bouza
in reply to: JamaL9722060

You need to create the suface from the corridor. go to corridor properties >> surface tab and pick want you want..

 

Jamal,

 

Don't be offended, but doing a few tutorials will go a long way with your understanding of the interface

Thank you

Joseph D. Bouza, P.E. (one of 'THOSE' People)

HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram


Note: Its all Resistentialism, so keep calm and carry on

64 Bit Win10 OS
Message 5 of 5
JamaL9722060
in reply to: Joe-Bouza

Many thanks for offering help.

 

Best

 

Jamal

---------------------------
Jamal Numan

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Rail Community


Autodesk Design & Make Report