Community
Civil 3D Forum
Welcome to Autodesk’s Civil 3D Forums. Share your knowledge, ask questions, and explore popular AutoCAD Civil 3D topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Cut and fill to specific elevation (BFE)- For FP Mitigation

5 REPLIES 5
Reply
Message 1 of 6
amybrammer10
1400 Views, 5 Replies

Cut and fill to specific elevation (BFE)- For FP Mitigation

I need to figure out the amount of cut and fill up to a specific elevation, the Base Flood Elevation.  Right now, I am creating the proposed and existing surfaces in Civil 3D and making a fellow coworker convert it to Eagle Point to generate this slice Volume Table. See attached PDF.  Is there a way to generate this type of table in Civil 3D? Any ideas?  Thank you!

5 REPLIES 5
Message 2 of 6

Is this what you're looking for?...

 

4-4-2012 8-46-10 AM.png

 

This can be exported out to a TXT file.



Todd Rogers
BIM Manager
Blog | Twitter | LinkedIn

Message 3 of 6
witzel
in reply to: amybrammer10

Another option is to set a user contour to your required elevation.  Extract the contour as a polyline and use it/them as a boundary.  Even if the boundary is only temporary.

You may have to edit them a bit to get the desired results.

 

Conan Witzel

Message 4 of 6

Yes but how do I compare the existing and proposed surfaces? It only allows me to select one of the surfaces. Thank you for your help!

Message 5 of 6
amybrammer10
in reply to: amybrammer10

I am trying to do a volume comparison between the proposed and existing surfaces and have to show the cut/fill volumes in one foot increments. 

Message 6 of 6

Type REPORTSURFACEVOLUME and you can get a volume that way.



Todd Rogers
BIM Manager
Blog | Twitter | LinkedIn

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Rail Community


Autodesk Design & Make Report