AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Reply
Contributor
marcoarmstrong7258
Posts: 11
Registered: ‎11-02-2012
Message 1 of 11 (673 Views)

Curved Ramps

673 Views, 10 Replies
01-14-2013 09:19 AM

How do you merge a ramp on to the main highway using corridors? Also how would you make that surface with two different alignments? I have my main road alignment and a ramp that comes on to it so the problem I'm having is making my 3d model with the road and surface combine.

*Expert Elite*
TRogers
Posts: 1,390
Registered: ‎09-05-2007
Message 2 of 11 (658 Views)

Re: Curved Ramps

01-14-2013 10:27 AM in reply to: marcoarmstrong7258

Under Intersections, select Add Approach.

If the issue was resolved by this method, please click on "Accept As Solution"
*Civil 3DJ*
Todd Rogers

Visit my blog here.

     
*Expert Elite*
sboon
Posts: 2,225
Registered: ‎11-08-2005
Message 3 of 11 (642 Views)

Re: Curved Ramps

01-14-2013 11:43 AM in reply to: TRogers

Todd, I'm not sure that this solution will work for the OP.  Could you provide more details?

*Expert Elite*
TRogers
Posts: 1,390
Registered: ‎09-05-2007
Message 4 of 11 (636 Views)

Re: Curved Ramps

01-14-2013 11:54 AM in reply to: sboon

Yeah, i totally misread that.  Most likely going to have to manipulate the corridor with targets.

If the issue was resolved by this method, please click on "Accept As Solution"
*Civil 3DJ*
Todd Rogers

Visit my blog here.

     
*Expert Elite*
sboon
Posts: 2,225
Registered: ‎11-08-2005
Message 5 of 11 (627 Views)

Re: Curved Ramps

01-14-2013 11:57 AM in reply to: TRogers

Marco, I did a class on this topic at AU2012.  If you have access to the class materials then search for my session.  It details a workflow which should work for your situation.

 

CI2160 - Intersections from the Inside Out. 

 

Contributor
marcoarmstrong7258
Posts: 11
Registered: ‎11-02-2012
Message 6 of 11 (625 Views)

Re: Curved Ramps

01-14-2013 11:59 AM in reply to: sboon

How do I get to the class sessions

Contributor
marcoarmstrong7258
Posts: 11
Registered: ‎11-02-2012
Message 7 of 11 (622 Views)

Re: Curved Ramps

01-14-2013 12:00 PM in reply to: sboon

I'm sorry I meant the class materials

Product Support
AlmasSuljevic
Posts: 780
Registered: ‎08-11-2010
Message 8 of 11 (560 Views)

Re: Curved Ramps

01-17-2013 06:32 AM in reply to: marcoarmstrong7258

Go to this link and look for the classes: http://au.autodesk.com/?nd=classes 



Almas Suljevic
Product Support Specialist
Autodesk Global Subscription and Support
Autodesk, Inc.

Please click on "Accept as Solution" if post helped you resolve the issue.
*Pro
fcernst
Posts: 1,162
Registered: ‎01-07-2011
Message 9 of 11 (543 Views)

Re: Curved Ramps

01-17-2013 07:37 PM in reply to: marcoarmstrong7258

Another easy job for the Intersection Wizard. 

Fred Ernst, PE
C3D 2015 SP2
Ernst Engineering
www.ernstengineering.com
Product Support
AlmasSuljevic
Posts: 780
Registered: ‎08-11-2010
Message 10 of 11 (512 Views)

Re: Curved Ramps

01-18-2013 11:11 AM in reply to: marcoarmstrong7258

If you are planning to start a new project and have similar situation you can create one long corridor with multiple baselines and multiple targets. This is good approach but I would advise it to seasoned users since there is very easy to get lost in the design. If you have two separate corridors next to each other, (It seems that it is the case here) there is no way to merge them. 



Almas Suljevic
Product Support Specialist
Autodesk Global Subscription and Support
Autodesk, Inc.

Please click on "Accept as Solution" if post helped you resolve the issue.
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.