AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Reply
Distinguished Contributor
MonkeyTrainer
Posts: 158
Registered: ‎11-30-2007
Message 1 of 7 (855 Views)
Accepted Solution

curb and gutter, something

855 Views, 6 Replies
12-20-2012 12:06 PM

i need a subassembly that can do what is circled in the image. i need a .5:1 for a base under my curb. my "help" for CIV3D isnt working, so i dont have pictures of my subs and its killing me.

 

thanks,

Might I suggest looking into the Subassembly Composer. You can make a curb and gutter subassembly pretty simply with whatever input parameters you need. 

*Expert Elite*
KMercier_C3D
Posts: 271
Registered: ‎12-14-2010
Message 2 of 7 (853 Views)

Re: curb and gutter, something

12-20-2012 12:09 PM in reply to: MonkeyTrainer

Might I suggest looking into the Subassembly Composer. You can make a curb and gutter subassembly pretty simply with whatever input parameters you need. 

Kati Mercier, P.E.

Co-author of "Mastering AutoCAD Civil 3D 2013"
AutoCAD Civil 3D 2013 Certified Professional and AutoCAD 2013 Certified Professional
AU2012 Speaker::: CI3001: Reverse Engineering with Subassembly Composer for AutoCAD Civil 3D
AU2011 Speaker::: CI4252: Create Subassemblies That Think Outside the Box With Subassembly Composer for AutoCAD® Civil 3D®
*Expert Elite*
sboon
Posts: 2,226
Registered: ‎11-08-2005
Message 3 of 7 (778 Views)

Re: curb and gutter, something

12-25-2012 06:31 PM in reply to: MonkeyTrainer

You might also be able to build what you need using the OOTB subassemblies.

 

Clipboard01.png

 

*Expert Elite*
tcorey
Posts: 2,767
Registered: ‎12-18-2002
Message 4 of 7 (740 Views)

Re: curb and gutter, something

12-26-2012 11:21 AM in reply to: KMercier_C3D

Kati, I went to AU Online to download your handouts, but nothing appears. Do you care to post them here for the community?

Tim Corey, Owner
Delta Engineering Systems
Redding, CA
Autodesk Authorized Value-Added Reseller
*Expert Elite*
KMercier_C3D
Posts: 271
Registered: ‎12-14-2010
Message 5 of 7 (734 Views)

Re: curb and gutter, something

12-26-2012 11:53 AM in reply to: tcorey

Hmmm my 2011 handout should be downloadable from here: http://au.autodesk.com/?nd=class&session_id=9196

And my 2012 handout should be downloadable from here: http://au.autodesk.com/?nd=class&session_id=10451

 

I think you need to be logged in to download? If you are still having difficulties let me know and I will look into it further. 

Kati Mercier, P.E.

Co-author of "Mastering AutoCAD Civil 3D 2013"
AutoCAD Civil 3D 2013 Certified Professional and AutoCAD 2013 Certified Professional
AU2012 Speaker::: CI3001: Reverse Engineering with Subassembly Composer for AutoCAD Civil 3D
AU2011 Speaker::: CI4252: Create Subassemblies That Think Outside the Box With Subassembly Composer for AutoCAD® Civil 3D®
*Expert Elite*
tcorey
Posts: 2,767
Registered: ‎12-18-2002
Message 6 of 7 (717 Views)

Re: curb and gutter, something

12-26-2012 10:37 PM in reply to: KMercier_C3D

Thanks, Kati. I got the docs.

 

I haven't read the newest one, Reverse Engineering..., but I read the 2011 doc. It's very clear and easy to understand. I highly recommend it to everyone.

 

BTW, Kati, in your AU bio, it mentions you are active in the Civil 3D Subassembly Composer forum. Is that a type or or is there a forum specifically for Subassembly Composer? Where is that? I don't find it anywhere on Autodesk.

 

And one more question, Kati, do you cover Subassembly Composer in Mastering Civil 3D 2013?

 

Prospero Nuevo!

 

Tim

 

Tim Corey, Owner
Delta Engineering Systems
Redding, CA
Autodesk Authorized Value-Added Reseller
*Expert Elite*
KMercier_C3D
Posts: 271
Registered: ‎12-14-2010
Message 7 of 7 (703 Views)

Re: curb and gutter, something

12-27-2012 06:15 AM in reply to: tcorey

Thank you for the compliment on the 2011 handout. I am glad that it has been a good resource for you. 

 

The forum in the AU bio is actually meant to reference this one, the AutoCAD Civil 3D forum, where I often answer questions about Subassembly Composer. To my knowledge, there isn't a stand-alone forum for it currently. 

 

Yes there is a full chapter on Subassembly Composer in Mastering AutoCAD Civil 3D 2013

Kati Mercier, P.E.

Co-author of "Mastering AutoCAD Civil 3D 2013"
AutoCAD Civil 3D 2013 Certified Professional and AutoCAD 2013 Certified Professional
AU2012 Speaker::: CI3001: Reverse Engineering with Subassembly Composer for AutoCAD Civil 3D
AU2011 Speaker::: CI4252: Create Subassemblies That Think Outside the Box With Subassembly Composer for AutoCAD® Civil 3D®
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.