AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Reply
Contributor
JEREMIAHM
Posts: 18
Registered: ‎02-24-2004
Message 1 of 3 (72 Views)

CS Conversion while importing DEM

72 Views, 2 Replies
09-13-2004 09:19 AM
I am importing a DEM file using the new civil tools in Map 2005 (same as Civil 3Dusing the import DEM command. I expand my civil workspace to DEM Files, right-click, and choose add. Then I pick my DEM file and set my coordinate system. When I click OK I get the attached message:

Also, I have tried starting a new surface. If i create a new surface and set all of the settings mentioned above, I click OK and nothing happens, just leaves me with no DEM data.

No on in the Map NG has replied so i am wondering if any of you have any ideas?

Thanks,

Jeremiah
Contributor
Karla Leighton
Posts: 16
Registered: ‎01-27-2004
Message 2 of 3 (72 Views)

Re: CS Conversion while importing DEM

10-08-2004 02:52 PM in reply to: JEREMIAHM
Hi,
Are you trying to add the DEM to a Grid surface or a TIN surface?
Try adding it to a TIN surface if you haven't.

This is from the 2004 readme (which would apply to Map 3D):
DEM Files Cannot Be Transformed for Grid Surfaces

To perform a coordinate transformation on a DEM file, include the DEM file as part of the surface definition data for a TIN surface. When you add the DEM file, you can specify the DEM file's coordinate system. If different than the drawing's coordinate system, a transformation of the coordinates is performed.
If you include a DEM file as part of a Grid surface definition, its coordinate system must match that of the drawing, or it cannot be added.

-Karla Leighton
Autodesk Technical Publications
Contributor
JEREMIAHM
Posts: 18
Registered: ‎02-24-2004
Message 3 of 3 (72 Views)

Re: CS Conversion while importing DEM

01-04-2005 06:45 PM in reply to: JEREMIAHM
I am only using Map 3D, not land desktop.
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.